Research Reports in Bulk Chemicals

Lanolin Market Analysis By Application (Personal Care & Cosmetics, Baby Care Products, Pharmaceuticals, Industrial) And Segment Forecasts To 2024

The lanolin market size exceeded USD 135 million in 2015 and is expected to witness a significant growth owing to growing end-use industries including personal care & cosmetics, baby care, and pharmaceuticals, particularly in Asia Pacific. Increasing natural personal care & cosme...Read More »

September : 2016

Hexane Market Analysis By Grade (Polymerization, Extraction), By Application (Edible Oil Extraction, Industrial Solvent, Adhesive Formulation, Leather Treatment) And Segment Forecasts To 2024

The global hexane market size was over USD 1.75 billion in 2015 and is expected to witness considerable growth owing to the widening application scope and increasing demand from the oil & gas extraction industry. It offers exceptional performance owing to the properties such as trans...Read More »

September : 2016

India Pearlescent Pigment Market Analysis By Product (Natural Pearl Essence, Titanium Dioxide Mica, Iron/Ferric Oxide Mica, Combination Mica), By Application (Paints & Coatings (Decorative Coating, Automotive Coating, Powder Coating, Coil Coating), Plastics (Packaging, Injection Molded Plastics), Printing Inks & Cosmetics) And Segment Forecasts To 2024

India pearlescent pigment market size exceeded USD 75.0 million in 2015. The industry has witnessed tremendous growth in recent years owing to high product demand in several end-use industries such as paints, cosmetics, & plastics. ...Read More »

September : 2016

Poly Alpha Olefin (PAO) Market Analysis By Application (Gear Oil, Engine Oil, Compressor Oil, Grease) And Segment Forecast To 2025

The global poly alpha olefin (PAO) market size exceeded USD 1.0 billion in 2015. Its growing demand in synthetic lubricants on account of reduced engine wear and tear is expected to remain a key factor driving the industry growth....Read More »

September : 2016

Low Smoke Halogen Free Flame Retardant Polypropylene (PP) Market Analysis By Application (Construction, Automotive, Electrical & Electronics, Industrial) And Segment Forecasts To 2024

The global low smoke halogen free flame retardant polypropylene (PP) market was worth USD 412.7 million in 2015 and is expected to witness a significant growth owing to its usage in industries such as construction, automotive, industrial, and electrical & electronics. Growing safety ...Read More »

September : 2016

Epoxy Resin Market Analysis By Application (Paints & Coatings, Wind Turbine, Composites, Construction, Electrical & Electronics, Adhesives) And Segment Forecasts To 2024

The global epoxy resin market size was USD 7.99 billion in 2015. Growing end-use industries including transportation, marine coatings, aerospace, electrical & electronic laminates, composites and decorative powder coatings are expected to augment the global epoxy resins demand....Read More »

September : 2016

Polyamide-Imide (PAI) Market Analysis by Application (Molding Resins, Wire Enamels, Coatings, Fibers) And Segment Forecasts To 2024

The global polyamide-imide (PAI) market size was USD 387.6 million in 2015. Growing demand for high temperature thermoplastics in various applications of automotive and aerospace industries is anticipated to steer PAI market over the forecast period. Commercially available product grades...Read More »

September : 2016

Conformal Coating Market Analysis By Product (Acrylic, Urethane, Epoxy, Silicone, Parylene), By Application (Consumer Electronics, Automotive, Medical, Aerospace & Defense) And Segment Forecasts To 2024

Conformal coating market size was USD 9.70 billion in 2015. These are mainly applied on printed circuit boards to protect them from heating, corrosion, moisture, dust and other environmental impacts. The product offers optimum protection to the circuit boards, thus improving the performa...Read More »

September : 2016

North America Awnings Market Analysis By Product [Stationary awnings (Metal, Patio, Traditional), Retractable awnings (Vertical, Patio, Traditional)], By Application (Residential, Commercial) And Segment Forecasts To 2024

The North America awnings market size was USD 2.47 billion in 2015. Increasing consumer preference for the outdoor deck and seating space construction units is expected to drive demand for retractable products in residential application over the forecast period. In addition, product inno...Read More »

September : 2016

North America Fragrance Wax Melts Market Analysis And Segment Forecasts To 2024

The North America fragrance wax melts market size was estimated at USD 1.05 billion in 2015 and is expected to witness significant growth owing to the availability of these products in various shapes and sizes. Changing lifestyles, hygiene concerns, and busy work schedules have led the c...Read More »

September : 2016

Exterior Architectural Coating Market Analysis By Resin Type (Acrylic, Epoxy, Polyester, Alkyd, Polyurethane), By Technology (Solventborne, Waterborne), By Product (Primer, Emulsion, Enamel), By Application (Residential [New, Repaint], Non-Residential [New, Repaint]) And Segment Forecasts To 2024

The global exterior architectural coating market size was USD 22.54 billion in 2015. The market is projected to grow at a significant rate owing to increasing number of construction projects in emerging economies including China, Singapore, India, and Brazil. Architectural coatings prote...Read More »

September : 2016

China Antiscalant Market Analysis By Type (Carboxylates, Phosphonates, Sulfonates, Fluorides), By Application (Coal Gasification, Chemical, Power) And Segment Forecasts To 2024

The China antiscalant market size was estimated at USD 309.8 million in 2015 and is projected to witness significant growth over the forecast period on account of its increasing consumption in chemical, pow...Read More »

September : 2016

Wood Adhesives Market Analysis By Product (Urea-Formaldehyde, Melamine Urea-Formaldehyde, Phenol-Formaldehyde, Isocyanates, Polyurethane, PVA, Soy-Based), By Application (Flooring & Plywood, Furniture, Doors & Windows, Housing Components) And Segment Forecasts To 2021

The global wood adhesives market size was valued at USD 14.46 billion in 2015. These adhesives find utilization in applications such as flooring & plywood, cabinet applications, furniture & subcomponents, and windows & door application among others....Read More »

September : 2016

Base Oil Market Analysis By Product (Group I, Group II, Group III), By Application (Automotive Oils, Process Oils, Hydraulic Oils, Metalworking Fluids, Industrial Oils) And Segment Forecasts To 2024

The global base oil market size was USD 28.32 billion in 2015. Increasing utilization of lubricants in end-use industries such as industrial and automotive is expected to remain a key driving factor over the forecast period. Base oils are a major constituent of any lubricant, which meets...Read More »

September : 2016

Iron Oxide Pigment Market Analysis By Product (Synthetic, Natural), By Color (Red, Yellow, Black, Blends), By Application (Construction, Coatings, Plastics, Paper) And Segment Forecast To 2024

The global iron oxide pigment market size was USD 1.83 billion in 2015. Growing demand in construction, paint, and plastic industries has urged the iron oxide manufacturing companies to increase their investment in this market....Read More »

September : 2016

Pressure Sensitive Adhesives Market Analysis By Technology (Water Based, Solvent Based, Hot-melt, Radiation Cured), By Product (Tapes, Labels, Graphic Films, Specialty), By End-Use (Automotive & Transportation, Electrical & Electronics, Consumer Goods, Packaging, Construction) And Segment Forecasts To 2024

The global pressure sensitive adhesives market size was USD 8.81 billion in 2015. Increasing need for weight reduction in end-user products offering high bonding solutions is expected to be a key determinant for industry growth over the next eight years....Read More »

September : 2016

Specialty Carbon Black Market Analysis By Grade (Conductive (Conductive Polymers, Paints & Coatings, Battery Electrodes, Printing Inks), Fiber (Polyester Fiber, PP Masterbatches, Nylon Textiles), Food (Packaging, Film & Sheet, Consumer Molded Parts)) And Segment Forecasts To 2024

The global specialty carbon black market size was USD 1.64 billion in 2015. Increasing consumption across end-use industries such as packaging, automotive, paints & coatings and textile is expected to drive growth....Read More »

September : 2016

Nitrocellulose Market Analysis By Application (Printing Inks, Automotive Paints, Wood Coatings, Leather Finishes, Nail Varnishes) And Segment Forecasts To 2024

The global nitrocellulose market size was 622.5 million in 2015. The surge in demand for nitrocellulose-based inks in paints & coatings industry especially across economies, such as Vietnam, India, UK, China, and Colombia had an overall positive impact on the market. Printing ink ind...Read More »

September : 2016

Physical Vapor Deposition (PVD) Market Analysis By Category (PVD Equipment, PVD Material, PVD Services) By Application (Microelectronics, Data Storage, Solar Products, Cutting Tools, Medical Equipment) And Segment Forecasts To 2024

The global physical vapor deposition (PVD) market was valued at USD 14.41 billion in 2015 and is expected to witness significant growth over the forecast period primarily owing to the need for reliable and durable coatings in medical equipment from developing economies....Read More »

September : 2016

Silicone Market Analysis By Product [Fluids (Modified, Straight), Resins, Gels, Elastomers (RTV, HTV, LSR)], By Application (Electrical & Electronics, Transportation, Construction, Personal Care & Pharmaceuticals, Textile) And Segment Forecasts To 2024

The global silicone market size was 2,393.8 kilo tons in 2015. Gaining popularity of the product for providing excellent insulation properties and low thermal reactivity in applications including automotive, construction and electronics is expected to have a positive impact....Read More »

September : 2016

Polyethylene Terephthalate (PET) Compounding Market Analysis By Application (Packaging, Electrical & Electronics, Industrial Machinery, Automotive, Construction, Material Handling) And Segment Forecasts To 2024

The global polyethylene terephthalate (PET) compounding market size was USD 3.95 billion in 2015. Increasing consumption across end-use industries such as packaging, automotive, electrical & electronics and construction is expected to drive growth. Increasing demand for water bottles...Read More »

September : 2016

Water Based Pigments Market Analysis By Application (Paints & Coatings, Inks) And Segment Forecasts To 2024

The global water based pigments market size was USD 7.29 billion in 2015 and is expected to grow at a significant rate owing to increasing government regulations on the VOC emission limits. Increasing demand for VOC free pigment dispersion systems by paint & coating manufacturers to ...Read More »

September : 2016

Superhydrophobic Coating Market Analysis By Raw Material (Carbon Nanotubes, Silica Nanoparticles, Graphene), By Property (Anti-Microbial, Anti-Icing/Wetting, Anti-Corrosion), By End-Use (Electricals & Electronics, Transportation & Allied Logistics, Medical, Optical, Construction, Textiles & Leather) And Segment Forecasts To 2024

The global superhydrophobic coating market was valued at USD 5.77 million in 2015. Rising demand for consumer electronics with highly water-repellent properties to protect sensitive data & components is a key factor driving market growth. Inspired biometrically from natural sources s...Read More »

September : 2016

Smartphone Screen Protector Market Analysis By Material (Tempered glass, Polyethylene terephthalate (PET), Thermoplastic Polyurethane (TPU)) By Application (USD700) And Segment Forecasts To 2024

The global smartphone screen protector market size was USD 31.13 billion in 2015 and is expected to witness significant growth over the forecast period primarily owing to increasing concerns regarding the safety of high end smartphones....Read More »

August : 2016

U.S. Automotive Coolant Market Analysis By Product (Ethylene Glycol, Propylene Glycol, Glycerin), By Technology (Inorganic Acid, Organic Acid, Hybrid Organic Acid), By Distribution (OEM, Automotive Aftermarket), By End-Use (Passenger Car, Commercial Vehicles, Two Wheelers) And Segment Forecasts To 2024

The U.S. automotive coolant market size was USD 611.8 million in 2015. Expanding automotive aftermarket and growing consumer awareness regarding automobile maintenance and engine efficiency is a decisive factor for industry growth....Read More »

August : 2016

Styrenic Block Copolymers (SBCs) Market Analysis By Product (Styrene Butadene Styrene (SBS), Styrene Isoprene Styrene (SIS), Hydrogenated Styrenic Block Copolymer (HSBC)), By Application (Paving & Roofing, Footwear, Polymer Modification, Adhesives & Sealants, Wires & Cables) And Segment Forecasts To 2024

The global styrenic block copolymers (SBCs) market size was USD 5.82 billion in 2015 and is expected to witness considerable growth owing to its usage in industries such as paving & roofing, footwear, adhesives & sealants, and wires & cables. The industry is expected to witne...Read More »

August : 2016

High Pressure Grinding Roller (HPGR) Market Analysis by Power Rating (2 x 100 kW – 2 x 650 kW, 2 x 650 kW – 2 x 1,900 kW, 2 x 1,900 kW – 2 x 3,700 kW, 2 x 3,700 kW, and above), Application (Diamond Liberation, Base Metal Liberation, Precious Metal Beneficiation, Pellet Feed Preparation), by Type (Ferrous Metals and Ferroalloys Processing, Non-Ferrous Minerals Processing), and Segment Forecasts till 2022

The global High Pressure Grinding Roller (HPGR) market is anticipated to witness growth owing to increase in adoption in the mining and cement industry. Grinding is expected to consume majority of the energy required in overall mining process; therefore, players are focusing on adopting ...Read More »

August : 2016

Nonwoven Filter Media Market Analysis By Technology (Spunbond, Meltblown, Wetlaid, Needlepunch), By Application (Transportation, Water Filtration, HVAC, Food & Beverages, Healthcare, Manufacturing, Advanced Technology, Hydrocarbon Processing) And Segment Forecasts To 2024

The global nonwoven filter media market size was USD 4.29 billion in 2015. They are used as filtration media and are highly preferred in industries like automotive, healthcare, personal care, lighting, agriculture, textiles, and transportation....Read More »

August : 2016

Powder Coatings Market Analysis By Resin Type (Epoxy, Polyester, Epoxy-Polyester, Acrylic, Polyurethane), By Application (Consumer Goods, Automotive, Architectural, General Industries, Furniture) And Segment Forecasts to 2024

The global powder coatings market size was USD 8.66 billion in 2015 and is expected to witness significant growth over the forecast period primarily owing to its various superior properties over conventional paints including high resistance to corrosion, high-quality finish, chipping and...Read More »

August : 2016

Conductive Polymers Market Analysis By Product (Acrylonitrile Butadiene Styrene (ABS), Polyphenylene Polymer (PPP)-based Resins, Polycarbonates (PC), Inherently Conductive Polymers (ICP), Nylon) By Application (Actuators & Sensors, Anti-Static Packaging, Batteries, Capacitors, Solar Energy) And Segment Forecasts To 2024

The global conductive polymers market size was 330.7 kilo tons in 2015. Rising awareness towards shielding sensitive electronic devices medium from electrostatic discharge (ESD), radio frequency interference (RFI), and electromagnetic interference (EMI) as a result of increasing market s...Read More »

August : 2016

Polyether Ether Ketone (PEEK) Market Analysis By Product (Unfilled, Carbon Filled, Glass Filled), By Application (Medical, Automotive, Aerospace, Industrial, Electricals& Electronics) And Segment Forecasts To 2024

The global polyether ether ketone (PEEK) market size was USD 488.8 million in 2015. Growing environmental concerns including huge carbon emissions have prompted the need for minimal fuel consumption. This burning issue has forced automobile manufacturers to focus on increasing fuel effic...Read More »

August : 2016

High Temperature Coatings Market Analysis By Product (Epoxy, Silicone, Polyethersulfone, Polyester, Acrylic, Alkyd) By Technology (Solventborne, Waterborne, Powder), By Technology (Solvent-Based, Dispersion/Water-Based, Powder-Based), By End-Use (Energy & Power, Metal Processing, Cookware, Stoves & Grills, Marine, Automotive, Coil Coating, Aerospace, Building & Construction) And Segment Forecasts To 2024

The global high temperature coatings market size was USD 3.27 billion in 2015. The industry is anticipated to witness moderate growth over the next eight years on account of increasing high temperature resistant coating demand across various end-use industries such ...Read More »

August : 2016

Human Milk Oligosaccharides (HMO) Market Analysis By Application (Infant Formula, Functional Food & Beverages, Food Supplements) And Segment Forecasts To 2024

The global human milk oligosaccharides (HMO) market size was USD 60.0 million in 2015. The demand for HMO is likely to grow at a considerable rate on account of increasing consumption of dietary supplements, high focus on gut health, and growing dairy industry. Lack of sufficient protect...Read More »

August : 2016

Soda Ash Market Analysis by Application (Glass, Chemicals, Soaps & Detergents, Metallurgy, Water Treatment, Pulp & Paper) And Segment Forecast To 2024

The global soda ash market size was USD 15.94 billion in 2015. Global soda ash market is supposed to observe demand recovery over the forecast period after witnessing negative year-on-year growth for the past few years....Read More »

August : 2016

Gulf Cooperation Council (GCC) Activated Carbon Market Analysis By Product (Powdered, Granular), By Application (Liquid Phase, Gas Phase), By End-Use (Water Treatment (Drinking Water, Effluent Water), Refinery, Food & Beverages Processing, Pharmaceuticals & Medical, Air Purification, Precious Metal Recovery, Sewage Treatment)And Segment Forecasts To 2024

Gulf Cooperation Council (GCC) activated carbon market was worth USD 94.6 million in 2015. Activated carbons are porous in nature and are derived from agricultural waste materials such as palm shells, walnut shells, sugarcanes, biogases, date stones, pecan shells, and cotton stocks....Read More »

August : 2016

Europe Medical Plastic Market Analysis By Product (Polyvinylchloride, Polypropylene, Polyethylene, Polystyrene, Silicone, Engineering Plastic), By Application (Disposables, Containers, Catheters, Surgical Instruments, Medical Bags, Implants, Drug Testing Equipment) And Segment Forecasts To 2024

The Europe medical plastic market size was USD 2.69 billion in 2015 and is expected to witness significant growth over the forecast period to the growing demand for medical devices coupled with increasing consumer awareness towards health. Growing self-medication and home healthcare indu...Read More »

August : 2016

Silicone Sealants Market Analysis By Technology (Pressure Sensitive, Radiation Curing, Room Temperature Vulcanizing, Thermoset), By Application (Insulating Glass, Construction, Automotive, Industrial) And Segment Forecasts To 2024

Silicone sealants market size was USD 2.20 billion in 2015. Growing demand for silicone sealants in multiple end-use industries, on account of superior characteristics including high bonding qualities, thermal and chemical resistance and non-corrosion is expected to propel market growth....Read More »

August : 2016

Jojoba Oil Market Analysis By Application (Cosmetics, Pharmaceutical, Industrial) And Segment Forecasts To 2024

The global jojoba oil market size was USD 151.7 million in 2015 and is expected to witness growth over the forecast period primarily owing to its rising demand from the cosmetic and personal care industry. Its excellent abilities in providing skin protection and preventing aging have hel...Read More »

August : 2016

Methyl Ethyl Ketone (MEK) Market Analysis By Application (Paints & Coatings, Printing Inks, Adhesives) And Segment Forecasts To 2024

The global methyl ethyl ketone (MEK) market was valued at USD 2.56 billion in 2015. Major MEK demand portion is accounted by paints and coatings, where it is widely used as a solvent. Positive demand outlook for adhesives, printing inks, paints, and coatings, on account of increasing con...Read More »

August : 2016

Mining Chemicals Market Analysis By Product (Frothers, Flocculants, Collectors, Solvent Extractants, Grinding Aids), By Application (Mining Processing, Explosives & Drilling, Water & Wastewater Treatment) And Segment Forecasts To 2024

The global mining chemicals market size was over USD 21.00 billion in 2015. Declining quality of ore has led to the utilization of complicated processing methods which is expected to propel demand for mining chemicals over the next eight years. Increasing demand for metals in numerous in...Read More »

August : 2016

China Thermoplastic Vulcanizates (TPV) Market Analysis By Application (Automotive, Fluid Handling, Consumer Goods, Medical Devices) And Segment Forecasts To 2024

China thermoplastic vulcanizates (TPV) market size exceeded USD 170 million in 2015. Rising demand for lightweight automotive components along with rising automotive sales is expected to remain the key driving factor for market growth over the forecast period. They are widely used in var...Read More »

August : 2016

Corrosion Protective Coatings Market Analysis By Resin Type (Alkyd, Acrylic, Epoxy, Polyurethane, Zinc) By Product (Solvent borne, Waterborne, Solids) By Application (Marine, Oil & Gas, Construction, Industrial, Automotive) And Segment Forecasts To 2024

The global corrosion protective coatings market size was USD 14.97 billion in 2015. The market is expected to witness growth owing to rising demand from end-use industries including oil & gas, manufacturing, and automotive. Growing use of epoxy-based paints and coatings in production...Read More »

August : 2016

Epoxy Coating Market Analysis By Product (Solvent-borne, Waterborne, Powder) By Application (Construction, Industrial, Transportation) And Segment Forecasts To 2024

The global epoxy coating market size was USD 21.52 billion in 2015. The market is expected to grow owing to rising demand from paints and coatings industry on account of improved durability and superior toughness...Read More »

August : 2016

High Heat Foam Market Analysis By Product (Silicone, Polyimide, Melamine, Polyethylene), By Application (Automotive, Locomotive, Industrial, Aerospace) And Segment Forecasts To 2024

The global High Heat Foam Market size was USD 7.40 billion in 2015. Growing demand in industrial and automotive applications particularly in developing countries including India and Brazil is expected to be a key factor contributing to the market growth....Read More »

August : 2016

Glyoxal Market Analysis By Application (Textile, Leather, Resin & Polymers, Cosmetics, Paper Packaging, Oil & Gas) And Segment Forecasts To 2024

The global glyoxal market size exceeded USD 1.30 billion in 2015. Growing end-use industries such as oil & gas, textile, and paper packaging, particularly in emerging economies of the Middle East & Africa and Asia Pacific, is expected to remain a key driving factor for global gly...Read More »

August : 2016

Automotive Adhesive Tapes Market Analysis By Adhesive Type (Acrylic, Natural Rubber, Butyl), By Backing Material (Polypropylene, Paper, PVC, Foam, Cloth), By Product (Masking Tapes, Double-Sided Tapes, Reinforced Tapes, Specialty Tapes), By Application (Interior, Exterior) And Segment Forecasts To 2024

The global automotive adhesive tapes market size was USD 6.19 billion in 2015 and is expected to witness significant growth over the next eight years owing to rising vehicle production in China, India, Mexico, and Brazil. Increasing product demand in light of its high durability and prot...Read More »

August : 2016

Conductive Ink Market Analysis By Product (Conductive Silver Ink, Conductive Copper Ink, Conductive Polymer, Carbon Nanotube Ink, Dielectric Ink, Carbon/Graphene Ink), By Application (Photovoltaic, Membran eSwitches, Displays, Automotives, Smart Packaging/RFID, Biosensors, Printed Circuit Boards) And Segment Forecasts To 2024

The global conductive ink market size exceeded USD 3.00 billion in 2015. Applications such as consumer electronics coupled with the need for cleaner energy have surged the demand, and the industry is expected to follow the same trend over the next eight years. It is likely to replace bul...Read More »

August : 2016

Chlorine Market Analysis By Application (EDC/PVC, Organic Chemicals, Inorganic Chemicals, Isocyanates, Chlorinated Intermediates, Propylene Oxide, Pulp & Paper, C1/C2 Aromatics, Water Treatment) And Segment Forecast To 2024

The global chlorine market size exceeded 70 million tons in 2015. The global industry has experienced a rapid growth in the last few years due to growing demand for chlorine derivatives from various end-use industries such as water, pharmaceutical, cosmetic, plastic, food processing, adh...Read More »

August : 2016

Synthetic Lubricants (Group IV, Group V) Market Analysis By Product (PAO, Esters, PAG), By Application (Engine Oils, HTF, Transmission Fluids, Metalworking Fluids) And Segment Forecasts To 2024

The global synthetic lubricants market size was 3,821.8 kilo tons in 2015 and is expected to witness significant growth over the next eight years owing to the rising demand from the automotive and industrial sectors especially in emerging economies such as India and China where there is ...Read More »

August : 2016

Caustic Soda Market Analysis By Application (Alumina, Inorganic Chemicals, Organic Chemicals, Food, Pulp & Paper, Soaps & Detergents, Textiles, Water Treatment, Steel/Metallurgy - Sintering) And Segment Forecast To 2024

The global caustic soda market size exceeded 74 million tons in 2015. Caustic soda accounts for over 40% of the total inorganic chemicals and finds application in various applications such as pulp & paper, chemicals, alumina, soaps & detergents, textiles, etc. Caustic soda indust...Read More »

August : 2016

Activated Carbon Market Analysis By Product (Powdered Activated Carbon (PAC), Granular Activated Carbon (GAC)), By Application (Liquid Phase, Gas Phase), By End-Use (Water Treatment, Food & Beverages, Pharmaceutical & Medical, Automotive, Air Purification) And Segment Forecasts To 2024

The global activated carbon market exceeded USD 3.0 billion in 2015. Growing awareness for clean water consumption is expected to aid the overall demand for activated carbon. Growing water treatment plants are expected to drive the market over the next six years. Growing concern among co...Read More »

August : 2016

Fructooligosaccharides (FOS) Market Analysis By Source (Inulin, Sucrose) By Application (Food & Beverages, Infant Formula, Dietary Supplements, Animal Feed, Pharmaceuticals) And Segment Forecasts To 2024

The global fructooligosaccharides market size was estimated at 134.0 kilo tons in 2015 and is expected to witness considerable growth over the next few years. The product is being increasingly used in food & beverages, dietary supplements, animal feed, and pharmaceuticals. It stimula...Read More »

July : 2016

Structural Adhesives Market Analysis By Technology (Water-Based, Solvent-Based), By Product (Urethanes, Epoxy, Acrylic, Cyanoacrylic), By Application (Transportation, Construction, Consumer Appliances, Furniture) And Segment Forecasts To 2022

Global structural adhesives market size was 5,052.9 kilo tons in 2013. High demand from furniture, transportation and construction are expected to drive the global industry growth over the forecast period....Read More »

July : 2016

Automotive Refinish Coatings Market Analysis By Resin Type (Acrylic, Alkyd, Polyurethane), By Technology (Waterborne, Solvent borne, UV-Cured), By Product (Primer, Basecoat, Filler, Topcoat), By Vehicle Age (<5, 5-10, >10) And Segment Forecasts To 2024

The global automotive refinish coatings market size was USD 8.45 billion in 2015 and is expected to witness significant growth over the next eight years on account of rising vehicle ownership in developing economies including China, India, Mexico, South Korea and Brazil. ...Read More »

July : 2016

Oil & Gas Separation Equipment Market Analysis By Product (Two-Phase Separators, Three-Phase Separators, Degasser, Scrubber, Deliquilizer, Heat treaters) And Segment Forecasts To 2022

Global oil & gas separation equipment market size was valued USD 6.38 billion in 2014. Growing petroleum industry particularly in Middle East & Africa and North America is anticipated to drive the market over the forecast period...Read More »

July : 2016

Smart Coating Market Analysis By Product (Single-layer, Multilayer), By Application (Automotive, Aerospace, Construction, Consumer Electronics, Military, Healthcare) And Segment Forecasts To 2024

The global smart coatings market size was USD 885.5 million in 2015. Increasing demand for the product from various end-user industries including military, aerospace, and healthcare is expected to drive growth over the forecast period. As opposed to regular coatings, these products ...Read More »

July : 2016

Glycolic Acid Market Analysis By Application (Personal Care, Household, Industrial), And Segment Forecasts To 2024

The glycolic acid market size was valued at USD 159.6 million in 2015. Growing demand for glycolic acid based skincare and hair care cosmetic products due to increasing awareness about healthy skin and hair are expected to drive the demand for the product over the forecast period....Read More »

July : 2016

UV (Ultraviolet) Curable Inks Market Analysis By Product (Free Radical, Cationic), By Application (Automotive, Medical, Publications, Packaging) And Segment Forecasts To 2024

The global UV (Ultraviolet) curable inks market size was USD 1.64 billion in 2015. Growing demand in multiple printing applications, on account of superior characteristics such as high bonding qualities, reduced drying time and low volatile organic compound (VOC) content is expected to p...Read More »

July : 2016

Super Absorbent Polymers Market Analysis By Application (Agriculture, Baby Diapers, Adult Incontinence Products, Female Hygiene Products, Others) And Segment Forecasts To 2022

The global super absorbent polymers market was valued at USD 2.07 billion in 2014. The market finds its largest application in the baby diapers industry. The significant growth rate of this segment is projected to boost the demand of the overall market....Read More »

July : 2016

California Hot Melt Adhesives Market Analysis By Product (Ethylene Vinyl Acetate, Styrenic Block Copolymers, Polyolefin, Polyamide, Polyurethane), By Application (Packaging, Disposables, Pressure Sensitive Products, Bookbinding, Furniture, Automotive, Construction) and Segment Forecasts To 2022

California hot melt adhesives market size was 105.11 million lbs in 2014. Trend in substitution of conventional fasteners by hot melt technology in packaging, disposable products and pressure sensitive products are a vital determinant for industry development....Read More »

July : 2016

Polyacrylamide Market Analysis By Product (Anionic, Cationic, Non-ionic), By Application (Water Treatment, Oil & Gas, Paper Making) And Segment Forecasts To 2024

The global polyacrylamide market size was USD 4.45 billion in 2015 and is expected to witness significant growth over the forecast period as a coagulant and flocculating agent in wastewater treatment. The product is used to separate solid and liquid molecules from wastewater, which is ex...Read More »

July : 2016

Caprolactam Market Analysis By Application (Nylon 6 Fibers, Nylon 6 Resins) By End-Use (Textile Yarn, Industrial Yarn, Engineering Plastics, Carpet Fibers & Staple Fibers) And Segment Forecasts To 2022

Global caprolactam market size was estimated at 4,925.9 kilo tons in 2014. The market is expected to witness substantial growth over the forecast period owing to its widespread use as a feedstock in the production of nylon 6 fibers and resins....Read More »

July : 2016

Polymer Foam Market Analysis By Type (Polyurethane Foam, Polystyrene Foam, PVC Foam, Phenolic Foam, Polyolefin Foam, Melamine Foam) By Application (Packaging, Building & Construction, Furniture & Bedding, Automotive), And Segment Forecasts To 2024

The global polymer foam market size was USD 113.85 billion in 2015 and is projected to grow at 6.6% in terms of revenue from 2016 to 2024.It is projected to witness noteworthy expansion in the near future on account of increasing use of the product in several applications such as automot...Read More »

July : 2016

Polyurea Coating Market Analysis By Raw Material (Aromatic Isocyanate-Based, Aliphatic Isocyanate-Based), By Product (Pure Polyurea, Hybrid Polyurea), By Technology (Spraying, Pouring, Hand Mixing), By Application (Building & Construction, Transportation, Industrial) And Segment Forecasts To 2024

The global polyurea coating market size was over USD 500 million in 2015. The product helps in protection of the substrates including metal, concrete, and wood from adverse climatic conditions. These are used in construction, transportation and manufacturing sectors on account of superio...Read More »

July : 2016

Corrosion Inhibitors Market Analysis by Product (Organic, Inorganic), By Application (Water-based, Oil-based), By End-use (Power Generation, Oil & Gas, Metal Processing, Pulp & Paper, Chemical Processing) And Segment Forecasts to 2024

The global corrosion inhibitors market size was USD 5.99 billion in 2015 and is expected to show significant growth over the forecast period owing to rising metal processing, power generation, and construction sector....Read More »

July : 2016

Adhesive Equipment Market Analysis By Product (Industrial Hot Melt, Adhesive Controllers, Cold Glue Applicators, Pneumatic Adhesive Applicators, Adhesive Pumping Systems and Application Guns), By Application (Packaging, Construction, Lamination, Disposable Hygiene Products and Technical Textiles) And Segment Forecasts To 2022

Global adhesive equipment market size was valued at USD 26.93 billion in 2014. Increasing application in packaging and DHP industries is expected to drive growth over the forecast period. Rising demand for intermittent adhesive dispensing to lower costs and product wastage is also expect...Read More »

July : 2016

Electronic Adhesives Market Analysis By Product (Thermal Conductive, Electrically Conductive, & UV Curing), By Application (Surface-Mount Devices, Potting & Encapsulation & Conformal Coatings) And Segment Forecasts To 2022

The global electronic adhesives market size was estimated at USD 3.28 billion in 2014. Soldering systems are substituted by electronic adhesives owing to enhanced conductive and thermal properties. Rising importance of compact devices such as CDs, flash drives and communication drives is...Read More »

July : 2016

Europe Polyurethane (PU) Market Analysis By Product (Rigid Foam, Flexible Foam, Coatings, Adhesives & Sealants, Elastomers (Sprayed Polyurethane Elastomers, Cast Polyurethane Elastomers), By End-Use (Furniture & Bedding, Construction, Electronics & Appliances, Automotive, Footwear, Packaging) And Segment Forecasts To 2024

Europe polyurethane (PU) market was valued at USD 15.75 billion in 2015. Stringent regulations pertaining to energy efficiency and carbon emission reduction in the region is anticipated to be the major driving factor over the forecast period. ...Read More »

June : 2016

North America Polyurethane (PU) Market Analysis By Product (Rigid Foam, Flexible Foam, Coatings, Adhesives & Sealants, Elastomers (Sprayed Polyurethane Elastomers, Cast Polyurethane Elastomers), By End-Use (Furniture & Bedding, Construction, Electronics & Appliances, Automotive, Footwear, Packaging) And Segment Forecasts To 2024

North America polyurethane (PU) market was valued at USD 12.09 billion in 2015. The growth of major end-use industries such as automotive and construction particularly in Mexico is expected to be a key determinant of industry growth over the forecast period. The U.S. Army uses polyuretha...Read More »

June : 2016

Plastic Compounding Market Analysis By Product (Olefins, PVC, Polystyrene, PET, Engineered Polymers) By Application (Automotive, Construction, Electrical & Electronics, Consumer Goods, Industrial Machinery) And Segment Forecasts To 2022

Global plastic compounding market size was 219.66 million tons in 2013. Increasing plastics demand in construction, automotive and electrical & electronics is expected to be a major factor driving global industry growth. Synthetic polymers such as PVC, PE, PC, PP, and PU have been tr...Read More »

June : 2016

Maleic Anhydride Market Analysis By Application (Unsaturated Polyester Resins (UPR), 1,4-Butanediol (BDO), Additives, Copolymers) And Segment Forecasts To 2024

The global maleic anhydride market size was USD 2.30 billion in 2015. Increasing demand as a platform chemical for manufacturing a wide variety of chemicals including copolymers, 1,4-butanediol (BDO) and unsaturated polyester resins (UPR) is expected to remain the key factor driving the ...Read More »

June : 2016

Electronic Materials And Chemicals Market Analysis By Product (Solid, Liquid, Gaseous), By Application (Silicon Wafers, PCB Laminates, Specialty Gases, Wet Chemicals And Solvents, Photoresist), By End-Use (Semiconductors & Integrated Circuits, Printed Circuit Boards) And Segment Forecasts To 2024

Electronic materials & chemicals market size was USD 47.71 Billion in 2015. Increasing demand for electronic materials & chemicals for manufacturing semiconductors, flat panel displays, and photolithographic printing is expected to propel market growth....Read More »

June : 2016

Drilling Fluids Market Analysis By Product (Oil-Based Fluids (OBF), Synthetics-Based Fluids (SBF), Water-Based Fluids (WBF)), By Application (Onshore, Offshore Oil & Gas) And Segment Forecasts To 2024

The global drilling fluids market is expected to reach USD 12.55 billion by 2024, according to a new report by Grand View Research, Inc. The increasing drilling activities, coupled with shifting industrial players’ focus towards exploration and development of unconventional gas res...Read More »

June : 2016

Compressor Oil Market Analysis By Compressor (Positive Displacement, Dynamic), By Base Oil (Synthetic, Semi-Synthetic, Mineral, Bio-Based), By End-Use (Manufacturing, Oil & Gas, Power, Automotive) And Segment Forecasts To 2024

The global compressor oil market size exceeded USD 55.0 billion in 2015. Developing end-use industries including chemical, energy, petrochemical, food & beverage, mining equipment, metal production, power, automobile, agricultural equipment, aerospace, and construction is expected to...Read More »

June : 2016

Cosmetic Preservative Market Analysis By Product (Paraben Esters, Formaldehyde Donors, Phenol Derivatives, Alcohols, Quaternary Compounds, Organic Acids), By Application (Skin & Sun Care, Hair Care, Toiletries, Fragrances & Perfumes, Makeup & Color) And Segment Forecasts To 2024

The global Cosmetic Preservative Market was valued at USD 271.3 million in 2015. Growing trend of using natural cosmetic products is expected to help boost the growth of the global Cosmetic Preservative Market. The rapidly increasing demand for cosmetics in Asia Pacific is anticipated to...Read More »

June : 2016

Nitric Acid Market Analysis By Application (Fertilizers, Adipic Acid, Nitrobenzene, Toluene Di-isocyanate, Nitrochlorobenzene) And Segment Forecasts To 2022

Global nitric acid market is expected to witness substantial growth over the forecast period owing to its widespread use in chemicals and fertilizers. Growing demand for ammonium nitrate fertilizers for agricultural applications is expected to be a key driver for nitric acid market growt...Read More »

June : 2016

Skin Care Products Market Analysis By Product (Face Cream, Body Lotion) And Segment Forecasts To 2024

The global skin care products market size was estimated at USD 129.21 billion in 2015. The market is poised for substantial growth, which can be attributed to the surging eminence of environment-friendly offerings inculcating the usage of natural constituents....Read More »

June : 2016

Automotive Textiles Market Analysis By Product (Woven, Nonwoven, Composites), By Application (Upholstery, Tires, Safety Devices, Engine Components) And Segment Forecasts To 2024

The global automotive textiles market size was USD 23.82 billion in 2015. Automotive textiles are part of technical textiles and are widely used across the automotive industry. The automotive textiles are majorly used for the interior of an automobile. The global automotive textiles...Read More »

June : 2016

Agricultural Films Market Analysis By Raw Material (LDPE, LLDPE, HDPE, EVA/EBA, Reclaims), By Application (Green House, Mulching, Silage) And Segment Forecasts To 2024

The global agricultural films market size was USD 7.27 billion in 2015. Increasing food demand owing to growing population coupled with the rising requirement for optimum agricultural productivity is anticipated to drive market growth over the forecast period....Read More »

June : 2016

Automotive Coatings Market Analysis By Product (Primer, Electrocoat, Basecoat, Clearcoat), By Technology (Waterborne, Solventborne, Powder Coatings, UV-Cured), By Application (Metal, Plastic), By End-Use (Light Vehicle OEM, Commercial Vehicle OEM, Automotive Refinish) And Segment Forecasts To 2022

Global automotive coatings market is expected to witness significant growth due to increasing consumer preference as it enhances durability and appearance of vehicles and protect it from UV radiation, extreme temperature, acid rain and foreign particles....Read More »

June : 2016

Optical Brighteners Market Analysis By Application (Paper, Fabrics, Detergents & Soaps, Synthetics & Plastic), By End-Use (Consumer Products, Security &Safety, Textiles & Apparel, Packaging) And Segment Forecasts To 2024

The global optical brighteners market size was USD 661.5 million in 2015 and is projected to witness noteworthy expansion over the next eight years owing to the increasing use of the product for manufacturing uncoated & coated paper. Growing demand for paper products with a superior ...Read More »

June : 2016

Gelatin Market Analysis By Raw Material (Pig Skin, Bovine Hides, Cattle Bones), By Function (Stabilizer, Thickener, Gelling Agent), By Application [Food & Beverage (Confectionery, Dairy Products, Meat & Poultry Products, Desserts, Beverage), Nutraceuticals, Pharmaceuticals, Photography, Personal Care] And Segment Forecasts To 2024

The global gelatin market size was 412.7 kilo tons in 2015. The increasing application of the product in food & beverage and pharmaceutical applications on account of exhibiting excellent stabilizing characteristics and good binding features is expected to remain a favorable factor f...Read More »

June : 2016

Emulsion Polymer Market Analysis By Product (Acrylic, Styrene Butadiene Latex, Vinyl Acetate Polymers), By Application (Paints & Coatings, Paper &Paper Board Coatings, Adhesives) And Segment Forecasts To 2024

The global emulsion polymer market size was 33.30 billion in 2015. Increasing emulsion polymer use in paints, coating and adhesives are expected to remain key driving factors for global emulsion polymer market over the forecast period....Read More »

June : 2016

Fermentation Chemicals Market Analysis By Product (Alcohols, Enzymes, Organic Acids), By Application (Industrial, Food & Beverages, Nutritional & Pharmaceuticals, Plastics & Fibers) And Segment Forecast To 2024

Global fermentation chemicals market demand was 51.83 million tons in 2013. Increasing stringent environment regulations by EPA and REACH coupled with green nature of fermentation chemicals is expected to drive global fermentation chemicals market over the forecast period....Read More »

June : 2016

Adhesion Promoter Market Analysis By Product (Silane, Maleic Anhydride, Chlorinated Polyolefins, Titanate & Zirconate), By Application (Plastics & Composites, Paints & Coatings, Rubber, Adhesives, Metals) And Segment Forecasts To 2024

Global adhesion promoter market size was USD 2.56 billion in 2015. The industry is characterized by rising demand for better adhesion to polypropylene-based substrates in the plastics & composites sector....Read More »

June : 2016

Polyurethane (PU) Microspheres Market Analysis By Application (Encapsulation, Paints & Coatings, Adhesive Films, Cosmetics) And Segment Forecasts To 2024

Global polyurethane (PU) microspheres market was valued at USD 52.8 million in 2015. Increasing application as an encapsulating agent in various application industries such as pharmaceutical, paints & coatings and agrochemical is a key driving factor for industry growth over the fore...Read More »

June : 2016

Rubber Processing Chemicals Market Analysis By Product (Anti-Degradants, Accelerators, Flame Retardants, Processing Aid/Promoters (Release Agents, Curing & Blowing Agents)), By Application (Tire, Non-Tire) And Segment Forecasts To 2024

The global rubber processing chemicals market size was estimated at USD 4.37 billion in 2015. Need for improved resistance against effects of heat, sunlight, oxygen, mechanical stress and ozone are leading the growth of the market globally....Read More »

May : 2016

Temperature Sensitive Coating Market Analysis By Product (Reversible, Irreversible), By Application (Healthcare/Pharmaceuticals, Food&Beverage, Household/Decorative, Industrial) And Segment Forecasts To 2024

The global temperature sensitive coating market size was USD 268.0 million in 2015. Rising demand from household/decorative, pharmaceutical, and industrial sector is anticipated to drive the market growth over the next eight years....Read More »

May : 2016

Synthetic Paper Market Analysis By Product (Biaxially Oriented Polypropylene, High-Density Polyethylene), By Application (Label, Non-Label) And Segment Forecasts To 2024

The global synthetic paper market size was over USD 240.0 million in 2015. It is expected to grow owing to excellent chemical and physical properties. The high quality of print on the surface is likely to propel its demand in non-label applications. Rising concerns regarding greenhouse g...Read More »

May : 2016

Alpha-Amylase Baking Enzyme Market Analysis By Source [Fungi, Bacteria (Maltogenic, G4), Plant-Based], By Application (Breads, Cookies & Biscuits, Desserts) And Segment Forecasts To 2024

The global alpha-amylase baking enzyme market size was USD 255.1 million in 2015. The increasing importance of enzymes in bread making to provide numerous features including excellent color texture, dough improvement and continued softness is expected to remain a favorable factor over th...Read More »

May : 2016

Chelating Agents Market Analysis By Product (Sodium Gluconate, Aminopolycarboxylate, Organphosphonates), By Application (Pulp & Paper, Household &Industrial Cleaning, Agrochemicals, Water Treatment, Chemical Processing, Consumer Products, Pharmaceutical) And Segment Forecasts To 2024

Global chelating agents market size was 1,026.0 kilo tons in 2015. The market is likely to observe growth over the forecast period owing to its increasing demand in pulp & paper, agrochemicals, and detergent applications....Read More »

May : 2016

Laminated Labels Market Analysis By Composition (Laminates, Facestock, Adhesive, Release Liner), By Laminate Type (Polyester, Polypropylene, UV Sunscreen Polyester, UL Approved Laminates), By Form (Reels, Sheets), By Application (Food & Beverages, Consumer Durables, Home & Personal Care, Pharmaceuticals, Retail Labels) And Segment Forecasts To 2024

The global laminated labels market was valued at USD 75.36 billion in 2015. The increasing use of labels in the food & beverages, consumer durables, and pharmaceutical industry is anticipated to boost market growth from 2016 to 2024....Read More »

May : 2016

Baby Diapers Market Analysis By Product (Cloth Diapers, Disposable Diapers, Training Nappy, Swim Pants, Biodegradable Diapers) And Segment Forecasts To 2022

Global baby diapers market size was USD 39.97 billion in 2014 and is projected to witness rapid growth owing to high birth rates in the developing regions over the forecast period. ...Read More »

May : 2016

Bioherbicides Market Analysis By Application (Grains & Cereals, Oil Seeds, Fruits & Vegetables, Turf & Ornament) And Segment Forecasts To 2024

Bioherbicides market witnessed tremendous growth over the past decade on account of increasing demand for eco friendly herbicides. This trend is expected to continue over the forecast period driving market growth....Read More »

May : 2016

Bitumen Market Analysis By Application (Roadways, Waterproofing, Adhesives, Insulation) And Segment Forecasts To 2024

Bitumen is petroleum product derived from heavy crude oil having an American Petroleum Institute (API) gravity of less than 10. It is referred to as Asphalt in the U.S. and is extensively used in road construction and as a waterproofing agent....Read More »

May : 2016

Aerospace Lubricant Market Analysis By Product (Gas Turbine Oil, Piston Engine Oil, Hydraulic Fluid), By End-Use (Civil, Defense, Space) And Segment Forecasts To 2022

Global aerospace lubricant market was valued at USD 760.4 million in 2014. Increasing air traffic in both developed as well as developing economies such as U.S., UK, India and China is expected to drive aerospace lubricant market over the forecast period. ...Read More »

May : 2016

Ultraviolet (UV) Disinfection Equipment Market Analysis By Application (Water Treatment, Waste Water Treatment, Air Treatment, Process Water Treatment, Surface Disinfection) And Segment Forecasts To 2022

Global UV disinfection equipment market size was USD 1,263.7 million in 2014. The market is expected to witness substantial growth over the forecast period owing to its widespread use in water & waste water treatment.  ...Read More »

May : 2016

Wireline Logging Service Market Analysis By Technology (Slickline, E-Line), By Hole Type (Open Hole, Cased Hole) And Segment Forecasts To 2022

Global wireline logging service market exceeded USD 16 billion in 2014. Potential increase in real-time data gathering through electric tools and increased production & exploration activities across the globe are estimated to drive demand over the forecast period....Read More »

May : 2016

Lubricant Additives Market Analysis By Product (Dispersants, Viscosity Index Modifiers, Detergents, Anti-Wear Additives, Antioxidants, Friction Modifiers), By Application (Automotive (HDV and LDV), Industrial (Metalworking Fluids, General Industrial Oil, Industrial Engine Oil)) And Segment Forecasts To 2024

Global lubricant additives market is expected to witness rapid growth owing to high demand from major end-use industries such as construction, automotive, and manufacturing. Rapidly growing transportation industry is expected to fuel demand for automotive lubricants such as heavy-duty mo...Read More »

May : 2016

Paint Protection Film Market Analysis By Application (Automotive, Electrical & Electronics, Aerospace & Defense) And Segment Forecasts To 2022

Global paint protection film market size was valued at USD 863.8 million in 2014. Rapidly expanding automotive industry particularly in emerging economies of Asia Pacific and Latin America is expected to remain a key driving factor for the global paint protection film market....Read More »

May : 2016

Pearlescent Pigment Market Analysis By Product (Natural Pearl Essence, Titanium Dioxide, Ferric Oxide, Combination Mica), By Application (Paints & Coating, Plastics, Printing Inks, Cosmetics) And Segment Forecasts To 2022

Global pearlescent pigment market size was USD 1.26 billion in 2014. The industry is characterized by rising preference for exclusivity and aesthetic brilliance in automotive paints and industrial coatings....Read More »

May : 2016

Aerospace Plastics Market Analysis By Polymer, By Application (Airframe & Fuselage, Wings & Rotor Blades, Empennage, Flight Deck & Cockpit, Cabin Areas), By End User (Commercial & Freighter Aircrafts, Military Aircrafts, Rotary Aircrafts, General Aviation) And Segment Forecasts To 2022

The global aerospace plastics market size was 57.1 kilo tons in 2014. The growth of the aviation sector, especially in the middle east, is expected to drive growth. Increased air traffic in commercial and defense segments have been responsible for aerospace market growth in North America...Read More »

April : 2016

Waterborne Coating Additives Market Analysis By Product (Wetting & dispersion agent, Defoaming, Rheology modifier (HEC, HMHEC, EHEC, HMPAPE, HEUR), Flow additives) And Segment Forecasts To 2022

Global waterborne coating additives market size was estimated to be 125.0 kilo tons in 2014. Growing infrastructure spending in industrial and residential sectors particularly in South East Asia and Middle East & Africa is expected to drive product demand in architectural and industr...Read More »

April : 2016

Polyurethane (PU) Foam Market Analysis By Product (Rigid Foam, Flexible Foam), By Application (Bedding & Furniture, Transportation, Packaging, Electronics, Footwear) And Segment Forecasts To 2024

Global Polyurethane Foam Market size was valued at USD 48.55 billion in 2015. Increasing demand from bedding & furniture industry owing to rising urban population in emerging economies of Asia Pacific such as China, India, and Indonesia is anticipated to drive growth over the forecas...Read More »

April : 2016

High Performance Pigments Market Analysis By Product (Organic, Inorganic), By Application (Coatings, Plastics, Inks, Cosmetics) And Segment Forecasts To 2022

The global High Performance Pigments Market was worth USD 4.17 billion in 2014. Growing automotive coatings demand is presumed to play a key role in positively shaping the market growth over the forecast period.As the name suggests, high performance pigments are characterized by superior...Read More »

April : 2016

Carbon Black Market Analysis By Application (Tires, High Performance Coatings, Plastics) And Segment Forecasts To 2022

Global carbon black market size was 11.99 million tons in 2014. High demand from tires, rubber goods, and plastics production is expected to drive the global carbon black market over the forecast period. Carbon black finds the majority of its usage in the manufacturing of tires and plays...Read More »

April : 2016

Nucleotide Market Analysis By Technology (Taqman Allelic Discrimination, Gene Chips & Microarrays, SNP By Pyrosequencing), By Application (Pharmaceuticals, Diagnostics Research, Food & Beverage Additive, Animal Feed Additive) And Segment Forecasts To 2022

Global nucleotide market size was USD 403.1million in 2014. Globally rising application scope of nucleotide in various end-use industries such as pharmaceuticals, food & beverage additive, animal feed additive and diagnostics research is likely to augment the growth....Read More »

April : 2016

Anisole Market Analysis By Application (Perfumes, Pharmaceuticals) And Segment Forecasts To 2022

Global anisole market size was USD 39.03 million in 2014 and is expected to witness significant growth over the next seven years owing to increasing demand in various industries including cosmetics, pharmaceuticals, and food & beverages. ...Read More »

April : 2016

Industrial Adhesives Market Analysis By Product (Acrylic, Polyvinyl Acetate, Epoxy, Polyurethane, Ethylene Vinyl Acetate), By Application (Automotive, Construction, Packaging, Electronics and Electrical, Energy & Utilities, Medical Devices, Industrial Machinery) and Segment Forecasts To 2022

Global industrial adhesives market size was 9,400.0 kilo tons in 2014. Industrial adhesives are increasingly replacing conventional fasteners in packaging, construction and automotive industries owing to superior product characteristics....Read More »

April : 2016

Engineering Adhesives Market Analysis By Product (Epoxies, Polyurethanes, Cyanoacrylates & Methacrylates), By Application (Transportation, Construction, Consumer Goods, Electrical & Electronics, Paints & Coatings, Sports & Leisure, Wind Energy) And Segment Forecasts To 2022

Global engineering adhesives market size was 4,549.6 kilo tons in 2014. Increasing demand on account of growing end-use industries in the emerging markets of Mexico, China, and India is expected to drive the global engineering adhesives market....Read More »

April : 2016

Vetiver Oil Market Analysis By Application (Fragrance, Pharmaceuticals, Food & Beverage) And Segment Forecasts To 2022

Vetiver oil market size was USD 44.5 million in 2014. The market is expected to witness surging demand owing to its profound usage in food & beverage, fragrance, and pharmaceutical applications....Read More »

April : 2016

Triethylene Glycol (TEG) Market Analysis By Application (Natural Gas Dehydration, Solvents, Plasticizers, Polyurethanes, Humectants, Polyester Resins) And Segment Forecasts To 2022

Global triethylene glycol (TEG) market is expected to witness significant growth over the forecast period on account of rising demand for natural gas from various end use industries including power generation, transportation and domestic applications....Read More »

April : 2016

Specialty Silica Market Analysis By Product (Precipitated Silica, Silica Gel, Fused Silica, Colloidal Silica, Fumed Silica), By Application (Rubber, Food & Healthcare, Coatings, Plastics, Abrasives & Refractories) And Segment Forecasts To 2022

Global specialty silica market size was estimated at 3,200.0 kilo tons in 2014. Increasing rubber consumption in tire production on account of automotive industry growth in developing economies including India, China, and Indonesia is expected to propel demand over the forecast period....Read More »

April : 2016

Polyester Hot Melt Adhesives Market Analysis By Application (Packaging, Textiles & Fabrics, Automotive, Electrical & Electronics, Polymer Films & Foils) And Segment Forecasts To 2022

Global polyester hot melt adhesives market size was 87.1 kilo tons in 2014. Growth of packaging and textile & fabrics industries in emerging markets of India, China and Vietnam is expected to drive growth over the next seven years. Rising demand for polyester hot melt adhesives over ...Read More »

April : 2016

Alpha Olefins Market Analysis By Product (1-Butene, 1-Hexene, 1-Octene, 1-Decene, 1-Dodecene), By Application (Polyethylene, Detergent Alcohol, Synthetic Lubricant) And Segment Forecasts To 2022

The global alpha olefins market was valued at USD 7.54 billion in 2014. Increasing polyethylene demand from packaging industry is expected to remain a key driving factor for alpha olefins market over the next seven years. Growing polyalphaolefin demand in synthetic lubricants on ac...Read More »

April : 2016

Injection Molded Plastic Market Analysis By Raw Material (Polypropylene, ABS, HDPE, Polystyrene), By Application (Packaging, Consumables & Electronics, Automotive, Building & Construction, Medical) And Segment Forecasts To 2022

The global injection molded plastic market size was valued at USD 199.86 billion 2014. The industry is anticipated to witness significant growth in near future on account of increasing plastics component demand across various end-use industries including packaging, automotive, electrical...Read More »

April : 2016

Middle East Drilling Fluid Market Analysis By Product (Oil-Based, Synthetic, Water-Based), By Application (Onshore Oil & Gas, Offshore Oil & Gas) And Segment Forecasts To 2022

Middle East drilling fluid market size was valued at USD 1,450.0 million in 2014. Growing concern towards collapsing boreholes, spill containment and handling solid wastes is expected to drive product demand over the forecast period. ...Read More »

April : 2016

Activated Bleaching Earth Market Analysis By Application (Edible Oil & Fats, Mineral Oil & Lubricants) And Segment Forecasts To 2022

Global activated bleaching earth market size was USD 2.35 billion in 2014. Increasing vegetable oil & fats production in emerging markets of Asia Pacific and Central & South America is expected to remain a key driving factor for global activated bleaching earth market over the fo...Read More »

April : 2016

Polyphenylene Sulfide (PPS) Market Analysis By Application (Automotive, Electronics & Electrical, Industrial, Coatings) And Segment Forecasts To 2022

Global polyphenylene sulfide (PPS) market size exceeded 80.0 kilotons in 2014 and is expected to witness significant growth over the next seven years owing to increasing demand from various sectors including automotive, electronics, industrial and aerospace....Read More »

April : 2016

Polyurea Market Analysis By Raw Material (Aromatic, Aliphatic), By Product (Coating, Lining, Adhesives &Sealants), By Application (Construction, Industrial, Transportation) And Segment Forecasts To 2022

Global polyurea market size was 114.3 kilo tons in 2014. The polymer is used in a host of applications including construction and transportation owing to its unique characteristics including fast curing time, high thermal stability, pigment compatibility and excellent water insensitivity...Read More »

March : 2016

North America Stainless Steel Round Bar Market Analysis By Product (Cr-Ni, Duplex & Super Duplex, High Nickel Alloys) And Segment Forecasts To 2022

North America stainless steel round Bar market size was valued at USD 1.42 billion in 2014 and is expected to witness significant growth over the next seven years owing to growing demand in construction applications including structural members in tension, load transfer devices, tie rods...Read More »

March : 2016

Metallic Pigments Market Analysis By Product (Aluminum, Zinc, Copper, Stainless Steel), By Application (Paints & Coatings, Plastics, Printing Inks, Cosmetics) and Segment Forecasts To 2022

Global metallic pigments market is expected to witness a CAGR of over 6% over the forecast period owing to high demand from growing automotive industry....Read More »

March : 2016

Traffic Road Marking Coating Market Analysis By Product (Paint, Thermoplastic, Preformed Polymer Tape, Epoxy) And Segment Forecasts To 2022

The global traffic road marking coating market size was USD 3.51 billion in 2014. The increasing infrastructure spending on new highways and streets construction is expected to remain a key factor driving the global traffic road marking coating market....Read More »

March : 2016

Flame Retardants for Aerospace Plastics Market Analysis By Product (Antimony Oxide, Aluminum Trihydrate, Organophosphate, Boron Compound), By Application (Carbon Fiber Reinforced Plastics (CFRP), Glass Reinforced Plastics (GRP), Polycarbonates, Thermoset Polyimides, Acrylonitrile Butadiene Styrene (ABS), Acetal/POM, Epoxies) and Segment Forecasts To 2022

Global flame retardants for aerospace plastics market was estimated at USD 17.9 million in 2014. The industry is characterized by increasing plastics usage in the aerospace sector and growing safety concerns regarding flammability of these materials....Read More »

March : 2016

Isobutanol Market Analysis By Product (Synthetic, Bio-Based), Application (Oil & Gas, Solvents & Coatings, Chemical Intermediates) And Segment Forecasts To 2022

The global isobutanol market is expected to witness significant growth as a biofuel owing to its growing preference as a substitute for ethanol in gasoline blends due its high energy density. Isobutanol is used as an immediate raw material in the production of isobutyl acetate....Read More »

March : 2016

Succinic Acid Market Analysis By Application (1,4 BDO, Resins, Coatings, Dyes & Inks, Pharmaceuticals, Polyurethanes, Food, Plasticizers, Cosmetics, Solvents & Lubricants, De-icing Solutions) And Segment Forecasts to 2022

Global succinic acid market size was estimated at 47.5 kilo tons in 2014. Improving construction and infrastructure in emerging economies of Asia Pacific is expected to trigger demand for resin, coating, and polyurethanes, which in turn is expected to drive industry growth....Read More »

March : 2016

Naphtha Market Analysis By Application (Chemical, Energy & Fuel) And Segment Forecasts To 2022

Global naphtha market size was estimated at 270.7 million tons in 2014. This industry is expected to witness significant growth over the next seven years on account of increasing demand for transportation fuel globally....Read More »

March : 2016

Aerosol Propellant Market Analysis By Product (Hydrocarbons, DME, Nitrous Oxide & Carbon Dioxide), By Application (Personal Care, Household, Automotive & Industrial, Foods, Paints, Medical) And Segment Forecasts To 2022

Global Aerosol Propellant Market size was over 9.0 million tons in 2014 and is expected to witness significant growth over the next seven years owing to increasing demand for aerosols in various applications including food, paints, personal care and automotive industry....Read More »

March : 2016

Crop Protection Chemicals Market Analysis By Product (Herbicides, Fungicides, Insecticides, Others), By Application (Fruits & Vegetables, Cereals, Maize, Cotton, Rice, Others) And Segment Forecasts To 2022

Global crop protection chemicals market size was estimated at USD 53.6 billion in 2014. Rapidly increasing population, increasing awareness regarding food & health safety, reduced arable land and necessity for enhanced crop yield is expected to drive demand over the forecast period....Read More »

March : 2016

Plastic Additives Market Analysis By Function (Property Modifiers, Property Extenders, Property Stabilizers, Processing Aids), By Product (Plasticizers, Flame Retardants, Impact Modifiers, Antioxidants, Antimicrobials, UV Stabilizers) and Segment Forecasts To 2022

Global plastic additives market size was estimated at 13.18 million tons in 2014. Plastic additives are increasingly being utilized for varied functions that include property modifiers, extenders, stabilizers and processing aids in industrial applications....Read More »

March : 2016

Petrochemical Market Analysis By Product (Ethylene, Propylene, Butadiene, Benzene, Xylene, Toluene, Vinyls, Styrene, Methanol) And Segment Forecasts To 2022

Global petrochemical market size was valued at USD 514.5 billion in 2014. Globally increasing demand from end-use industries ranging from manufacturing to consumer goods coupled with favorable regulatory framework particularly in Asia Pacific region is expected to drive market over the n...Read More »

March : 2016

Precipitated Silica Market Analysis By Application (Rubber, Agrochemicals, Oral Care, Food Industry)And Segment Forecasts To 2022

Precipitated silica market size was USD 1.62 billion in 2014.The market is expected to witness substantial growth owing to its profound usage in rubber, oral care, and packaging applications. ...Read More »

March : 2016

Polymer Modified Bitumen Market By Product (Thermoplastic Elastomers, Plastomers), By Application (Road Construction, Roofing) And Segment Forecasts To 2022

Global polymer modified bitumen (PMB) market size was estimated at USD 7.67 billion in 2014 and is expected to witness significant growth over the next seven years owing to its rising demand from various application industries including road construction, roofing, adhesives and coatings....Read More »

March : 2016

Aerosol Valve Market Analysis By Product (Continuous, Metered), By Application (Personal Care, Household, Automotive & Industrial, Food, Paints, Medical) And Segment Forecasts To 2022

Global Aerosol Valve Market size was 14.92 billion units in 2014. Rising demand for aerosol products including hair sprays, room fresheners, deodorants, and antiperspirants is expected to drive growth....Read More »

March : 2016

Conductive Silicone Rubber Market Analysis By Product (Thermally Conductive, Electrically Conductive), By Application (Automotive & Transportation, Electrical & Electronics, Industrial machines), And Segment Forecasts To 2022

Global conductive silicone rubber market size was worth USD 3,486.7 million in 2014. Electronic industry growth, particularly in Asia Pacific, is expected to fuel the demand in lighting as well as wire applications. In addition, rising importance of anti-static packaging for dust co...Read More »

March : 2016

Polyethylene Naphthalate (PEN) Market Analysis By Application (Beverage Bottling, Electronics, Packaging, Rubber Tires, Others) And Segment Forecasts To 2022

Global polyethylene naphthalate (PEN) market size was estimated at USD 827.0 million in 2014. PEN is largely used in packaging application owing to improved thermal and barrier properties such as resistance to oxidation is expected to augment market growth over the forecast period....Read More »

March : 2016

Water Soluble Polymers Market Analysis By Product (Polyacrylamide, Polyvinyl Alcohol, Guar Gum, Gelatin, Cellulose Ether, Casein, Xanthan Gum, Polyacrylic Acid), By Application (Water Treatment, Food, Personal Care & Detergents, Oil & gas, Pulp & Paper, Pharmaceuticals) And Segment Forecasts To 2022

Global water soluble polymers market size was valued at USD 27.30 billion in 2014 and is expected to witness significant growth over the next seven years owing to growing applications in drilling, enhanced oil recovery, mining, waste water treatment and food....Read More »

February : 2016

Offshore Lubricants Market Analysis, By Application (Engine Oil, Hydraulic Oil, Gear Oil, Grease), By End-Use (Offshore Rigs, FPSOs, OSVs) and Segment Forecasts To 2022

Global offshore lubricants market size was 98.81 kilo tons in 2014. Lubricants are used for various offshore applications such as turbines, vessel engines, hydraulic equipment, gearboxes and offshore machinery....Read More »

February : 2016

Pressure Sensitive Tape Market Analysis By Backing Material (Polypropylene, Paper, PVC), By Product (Carton Sealing Tapes, Masking Tapes, Double Sided Tapes, Electrical Tapes), By Application (Packaging, Building & Construction, Electrical & Electronics, Automotive, Health & Hygiene) And Segment Forecasts To 2022

Global Pressure Sensitive Tape Market size was 41,442.0 million square meters in 2014 and is expected to witness significant growth over the next seven years owing to its increasing consumption in corrugated box packaging of foods & beverages. The industry is also expected to grow owing to advancements in manufa...Read More »

February : 2016

Metalworking Fluids Market Analysis By Product (Mineral, Synthetic, Bio-based), By Application (Neat Cutting Oils, Water Soluble Cutting Oils, Corrosion Preventive Oils) And Segment Forecasts To 2022

Global metalworking fluids market size was USD 9.34 billion in 2014 and is expected to witness significant growth over the next seven years owing to increasing demand from the automobile sector in emerging economies including China and India....Read More »

February : 2016

Water Treatment Chemicals And Technology Market Analysis By Product (Pumping Systems, Membrane Separation, Chemicals) And Forecasts, 2015 To 2022

Global water treatment chemicals And technology market was valued at USD 128.89 billion in 2014. Rising awareness towards imparting softness to hard water along with regulatory inclination towards reducing water pollution for industrial and household applications is expected to favor gro...Read More »

February : 2016

Slideway Oil Market Analysis By Product (ISO VG 68, ISO VG 220) And Segment Forecasts To 2022

Global slideway oil market size was USD 60.61 billion in 2014 and is expected to witness significant growth over the next seven years owing to high demand from industrial, construction, and automotive sectors. ...Read More »

February : 2016

Polyurethane Dispersion (PUD) Market Analysis By Product (Water Based, Solvent Based), By Application (Textile Finishing, Natural Leather Finishing, Synthetic Rubber) And Segment Forecasts To 2022

Global polyurethane dispersion market size exceeded 290 kilo tons in 2014. Leather and textile industry were major end-use application industries in 2014. ...Read More »

February : 2016

Personal Care Packaging Market Analysis By Product (Flexible, Rigid Plastics, Paper, Metal, Glass), By Packaging Type (Bottles, Jars, Cans, Cartons, Tubes, Pouches), By Application (Skin Care, Hair Care, Bath & Shower, Fragrances) And Segment Forecasts To 2022

Global personal care packaging market size was USD 23.17 billion in 2014 and is expected to witness substantial growth over the forecast period owing to increasing demand for skin care products in various countries including India, China, Indonesia, U.S., Mexico, Vietnam, Brazil, UAE and...Read More »

February : 2016

Electroactive Polymers Market Analysis By Product (Conductive Polymers, Inherently Dissipative Polymers (IDP), Inherently Conductive Polymers (ICP)), By Application (Actuators, Sensors, ESD & EMI Protection, Antistatic Packaging), And Segment Forecasts To 2022

Global electroactive polymers market size was 234.7 kilo tons in 2014. Rising importance of piezoelectric and ferromagnetic materials for electronic applications along with increasing expenditure for the development of new conductive technologies is expected to have a positive impact on ...Read More »

February : 2016

Paraffin Wax Market Analysis By Application (Candles, Packaging, Cosmetics, Hot melts, Board Sizing, Rubber) And Segment Forecasts To 2022

Global paraffin wax market size was 3,334.1 kilo tons in 2014 and is expected to witness significant growth over the next seven years owing to its growing application in candles, packaging and cosmetic industry. Growing demand for these products is expected to result in market developmen...Read More »

February : 2016

Chitosan Market Analysis By Application (Water Treatment, Pharmaceutical & Biomedical, Cosmetics, Food & Beverage) And Segment Forecasts To 2022

Global chitosan market is expected to witness significant growth over the forecast period owing to rising demand in various end-use industries including water treatment, pharmaceuticals, medical, food & beverage and cosmetics....Read More »

February : 2016

Europe Oilfield Equipment Market Analysis By Product (Drilling Equipment, Pumps & Valves, Field Production Machinery) And Segment Forecasts To 2022

Europe oilfield equipment market size was valued at USD 16.39 billion in 2014. Growing crude demand has been prompting exploration & production companies in Europe to get involved in extensive drilling activities in onshore and offshore locations....Read More »

February : 2016

Antifouling Coating Market Analysis By Application (Shipping Vessels, Drilling Rigs & Production Platforms) And Segment Forecasts To 2022

Global Antifouling Coating Market is expected to witness significant growth in light of increasing demand in hulls and underwater surfaces of shipping vessels as it provides smoothness and superior polishing effect. ...Read More »

February : 2016

Thermal Spray Coating Market Analysis By Product (Metal, Ceramic, Intermetallic, Polymer) By Application (Aerospace, Industrial Gas Turbine, Automotive) And Segment Forecasts To 2022

Global thermal spray coating market size was estimated at USD 7.41 billion in 2014. Rising demand in various applications including automotive and aerospace is expected to be one of the key market drivers....Read More »

February : 2016

Heat Transfer Fluids Market Analysis By Product (Silicones & Aromatics, Mineral Oils, Glycol), By Application (Oil & Gas, Chemical Industry, Concentrated Solar Power (CSP), Food & Beverages, Plastics, Pharmaceuticals, HVAC) And Segment Forecasts To 2022

Global heat transfer fluids market size was estimated to be 465.9 kilo tons in 2014. Rapid industrialization in BRICS economies particularly in manufacturing sectors including automotive, metal processing, chemical, and oil & gas is expected to remain a major factor driving demand....Read More »

February : 2016

Acrylic Acid Market Analysis, By Product (Acrylate Esters, Glacial Acrylic Acid), By End-Use (Surfactants and Surface Coatings, Organic Chemicals, Adhesives, Textiles, Water Treatment, Personal Care Products), Bio Acrylic Acid Downstream Potential And Segment Forecasts To 2022

Global acrylic acid market size was 5,750.0 kilo tons in 2014. Growing demand for super absorbent polymers in personal care industry is expected to drive growth over the forecast period. Increasing consumption in surfactants, surface coatings and adhesives & sealants production is al...Read More »

February : 2016

Biofertilizers Market Analysis By Product (Nitrogen Fixing, Phosphate Solubilizing), By Application (Seed Treatment, Soil Treatment) And Segment Forecasts To 2022

Global biofertilizers market size was estimated at USD 535.8 million in 2014. Excessive application of agrochemicals on crops leading to soil contamination and other environmental hazards is expected to be a key market driver over the forecast period....Read More »

February : 2016

Silicone Elastomers Market Analysis By Product (HTV, RTV, LSR), By Application (Electrical & Electronics, Automotive & Transportation, Industrial Machinery, Consumer Goods, Construction) And Segment Forecasts To 2022

Global silicone elastomers market size was valued at USD 7.19 billion in 2014. Superior characteristics make these elastomers extremely valuable for numerous applications across diverse industries....Read More »

January : 2016

Flush Mount Photo Album Market Analysis By End-Use (Professional, Personal) And Segment Forecasts To 2022

The global flush mount photo album market size was valued at USD 3.35 billion in 2014. The market is poised for high growth throughout the forecast period on account of growing preference towards theme-based weddings and increased demand for photojournalism....Read More »

January : 2016

Hairbrush Market Analysis By Application (Personal, Professional) By Region (U.S., UK, Germany, China) And Segment Forecasts To 2022

The China hairbrush market size was valued at USD 3.69 billion in 2014 and is expected to grow significantly over the forecast period, owing to increasing health and hygiene awareness....Read More »

January : 2016

Titanium Dioxide Market Analysis By Application (Paints & Coatings, Plastics, Paper & Pulp, Cosmetics) And Segment Forecasts To 2022

Global titanium dioxide market size was estimated at USD 15.17 billion in 2014 and is expected to witness significant growth over the next seven years owing to increasing demand from various industries including cosmetics, paints & coatings, and plastics. ...Read More »

January : 2016

Ammonium Sulfate Market Analysis By Product (Solid Ammonium Sulfate, Liquid Ammonium Sulfate), By Application (Fertilizers, Feed Additives, Industrial Use) And Segment Forecasts To 2022

Global ammonium sulfate market size was estimated at USD 2.86 billion in 2014 and is anticipated to witness significant growth over the next seven years. ...Read More »

January : 2016

Paraxylene Market Analysis By Application (Dimethyl Terephthalate (DMT), Purified Terephthalic Acid (PTA)) And Segment Forecasts To 2022

Global paraxylene market demand was estimated at 36.83 million tons in 2014. Paraxylene (PX) demand has witnessed steady growth since past few years on account of stable demand from polyester manufacturers....Read More »

January : 2016

Biochar Market Analysis By Technology (Pyrolysis, Gasification,), By Application (Agriculture) And Segment Forecasts To 2022

Global biochar market size was 1,000.0 kilo tons in 2014 and is expected to witness steady growth over the next seven years owing to increasing demand from the agricultural sector in various countries including U.S., Canada, Germany and Australia....Read More »

January : 2016

Decorative Coatings Market Analysis By Product (Primer, Enamel, Emulsions), By Technology (Waterborne, Solventborne) By Application (Residential, Commercial) And Segment Forecasts To 2022

Global decorative coatings market size was 21,473.1 kilo tons in 2014 and is expected to witness significant growth over the next seven years owing to increasing use in construction applications across various countries including China, U.S., Mexico, Qatar, UAE, India, Vietnam and Singap...Read More »

January : 2016

Automotive Wrap Films Market Analysis By Application (Heavy Duty Vehicles, Medium Duty Vehicles, Light Duty Vehicles) And Segment Forecasts To 2022

Global automotive wrap filmsmarket size was USD 909.0 million in 2014. It is expected to grow owing to various advantages including low setup cost, easy customization, high durability and variety of color choices....Read More »

January : 2016

Ceramide Market Analysis By Application (Cosmetics, Pharmaceutical, Food, Petcare) And Segment Forecasts To 2022

A white crystalline substance which is almost odorless are known as Ceramides. They have a boiling point of over 300°C. Ceramides are soluble in DMSO and ethanol and they belong to the family of waxy lipid molecules....Read More »

January : 2016

Global Allantoin Market Analysis By Application (Cosmetic, Pharmaceutical, Oral Hygiene) And Segment Forecasts To 2022

Global allantoin market is expected to witness growth on account of rising demand from various application industries including cosmetics, pharmaceutical and oral hygiene....Read More »

January : 2016

Piling Machine Market Analysis, By Product (Impact Hammers, Vibratory Drivers, Rigs), By Method (Impact Driven, Drilled Percussive, Rotary Bored, Air Lift Reverse Circulation Drilling (RCD), Auger Boring, Continuous Flight Auger (CFA)), And Segment Forecasts To 2024

The global piling machine market size was USD 4.39 billion in 2015 and is projected to witness significant growth over the forecast period owing to rapid infrastructural development across commercial and residential sectors. Increasing industrialization and rising consumption of metals a...Read More »

January : 2016

Global Intumescent Coatings Market Analysis By Technology (Water-Based, Solvent-Based, Epoxy-Based), By Application (Cellulosic, Hydrocarbons), By End-Use (Oil & Gas, Construction, Automotive) And Segment Forecasts To 2022

Intumescent coatings are a form of passive fire protection commonly used in the construction industry to increase the fire resistance of structural members, by up to one to three hours, as required by the structural fire design codes....Read More »

January : 2016

Propionic Acid Market Analysis By Application (Animal Feed & Grain Preservatives, Food Preservatives, Herbicides, Chemicals & Pharmaceuticals) And Segment Forecasts To 2020

Growing high quality animal feed consumption has led to increased feed preservatives demand which in turn is expected to drive propionic acid market growth. Increasing requirement for mold and bacteria inhibiting additives coupled with growing demand for feed products having longer shelf...Read More »

December : 2015

Amines Market Analysis By Product (Ethanolamines, Alkylamines, Fatty Amines), By Application (Crop Protection, Surfactants, Water Treatment, Personal Care) And Segment Forecasts To 2020

Global amines market is expected to be driven on account of increased application scope in crop protection, personal care products, paint & coatings, surfactants and water treatment. Agriculture growth in China and India coupled with rising need for yield improvement among farmers is...Read More »

December : 2015

Lignin Market Analysis By Product (Ligno-sulphonates, Kraft Lignin, Organosolv Lignin, High Purity Lignin) By Application (Macromolecules, Aromatics) And Segment Forecasts To 2022

The global lignin market is expected to exceed 1.7 million tons by 2022. It bonds at a molecular level with any ingredient or solvent and thus is easily absorbed by the product....Read More »

November : 2015

Acrylonitrile Butadiene Styrene (ABS) Market Analysis By Application (Appliances, Automotive, Consumer, Construction, Electrical & Electronics) And Segment Forecasts To 2022

Global acrylonitrile butadiene styrene (ABS) market size was USD 20.22 billion in 2014. Superior properties such as strength and durability at low temperatures are expected to have a positive impact over the next seven years....Read More »

November : 2015

Nonwoven Fabrics Market Analysis By Product (Polypropylene, Polyesters, Nylon), Technology (Spunlaid, Carded, Air Laid, Wet Laid), Application (Durable, Disposable) And Segment Forecasts To 2020

Increasing demand for personal hygiene products coupled with growing population is expected to be key driving factor for the growth of nonwoven fabrics market over the forecast period. Increasing birth rate and ageing population has contributed for growing demand of hygiene products such...Read More »

November : 2015

Synthetic Ester Lubricants Market Analysis By Application (Compressor Oils, Hydraulic Oils, Metalworking Fluids, Diesel And Petrol Engine Oils) And Segment Forecasts To 2020

Global synthetic ester lubricants market size was USD 1.3 billion in 2013. Rising demand from automotive and aerospace industry in order to produce fuel efficient and optimum engines has resulted in augmenting market growth for the product....Read More »

November : 2015

Marine Lubricants Market Analysis By Product (Mineral, Synthetic, Bio-Based), By Application (Engine Oil, Hydraulic Oil, Grease) And Segment Forecasts To 2020

Increasing global cargo fleet on account of increasing seaborne trade is expected to remain a key driving factor for global marine lubricants market over the next six years. Increasing number of voyages per year coupled with expansion of global shipping industry is also expected to have a positive influence on the m...Read More »

November : 2015

Plant Growth Regulators Market Analysis By Product (Cytokinins, Auxins) And Segment Forecasts To 2020

The global plant growth regulators market is expected to grow on account of increased use in modifying plant physiological processes such as stimulating or inhibiting enzyme systems and regulating the plant metabolism. Growing demand for regulating cotton metabolism is expected to have t...Read More »

November : 2015

Zeolite Market Analysis By Product (Natural Synthetic), Application (Catalysts, Adsorbents, Detergent Builders) And Segment Forecasts To 2022

Global Zeolite market size was valued USD 27.9 billionin 2014 and is expected to witness significant growth over the next seven years owing to growing demand for detergents, increasing hygiene awareness among consumers and rising refining output....Read More »

November : 2015

UV Light Stabilizers Market Analysis By Application (Furniture & Interiors, Decking & Flooring) And Segment Forecasts To 2022

Global UV light stabilizers market was worth USD 171.2 million in 2014. Increasing ultraviolet radiation protection demand in wood coatings industry is expected to drive global growth over the forecast period....Read More »

November : 2015

Polyols Market Analysis By Product (Polyether, Polyester), By Application (Flexible Foams, Rigid Foams, Coatings, Adhesives & Sealants, Elastomers) And Segment Forecasts To 2020

Polyols have similar properties as that of sugar, which has opened up a wide range of applications in pharmaceutical and food production. Growing demand in these industries is expected to drive the polyols market through the forecast period....Read More »

October : 2015

Phenolic Resins Market Analysis By Product (Resol Resins, Novolac Resins), By Application (Insulation, Laminates, Molding Compounds, Wood Adhesives) And Segment Forecasts From 2014 To 2020

The global phenolic resins industry is anticipated to witness stable growth from 2014 to 2020 owing to rising demand from transportation and construction sector. Phenolic resins find their applications in numerous segments on account of their properties including high heat resistance &am...Read More »

October : 2015

Glyphosate Market Analysis By Application (Conventional Crops, GM Crops) And Segment Forecasts To 2020

Growing demand for genetically modified (GM) crops is expected to drive the global glyphosate market over the next six years. Increasing population coupled with increased crop consumption in animal feed as well as biofuels has spurred GM crops growth....Read More »

October : 2015

Membrane Separation Market Analysis By Product (Microfiltration, Ultrafiltration, Nanofiltration, Reverse Osmosis), By End-Use (Water & Waste-Water Treatment, Industrial, Healthcare) And Segment Forecasts To 2020

The global membrane separation market was valued over USD 17 million in 2012. Transition towards physical treatment of water against conventional water-treatment methods is expected to impact the market favorably....Read More »

October : 2015

Surfactants Market Analysis By Product (Cationic, Nonionic, Anionic, Amphoteric), By Application (Home Care, Personal Care, Industrial & Institutional Cleaners, Food Processing, Oilfield Chemicals, Agricultural Chemicals, Textiles, Emulsion Polymerization, Paints & Coatings, Construction) And Segment Forecasts To 2022

Global surfactants market size was worth USD 29.93 billion in 2014. Growth of detergents market particularly in Asia Pacific and Latin America on account of growing disposable income levels is expected to drive the global surfactants market over the forecast period....Read More »

October : 2015

Thermoplastic Polyurethane (TPU) Films Market Analysis By Application (Automotive, Railways, Leisure & Sports, Energy, Building & Construction, Furniture, Aerospace) And Segment Forecasts To 2020

TPU films market is expected to be driven by increasing market penetration in automotive industry. The after sales/replacement market has become a focal point for the consumption of TPU films in automotive applications over the last few years....Read More »

October : 2015

Nanocoatings Market Analysis By Product (Anti-Fingerprint, Anti-Microbial, Anti-Fouling & Easy-To-Clean, Self-Cleaning), By Application (Healthcare, Food, Packaging, Marine, Water Treatment, Electronics, Construction, Automotive, Energy) And Segment Forecasts To 2020

Global nanocoatings market demand was 255 kilo tons in 2012, with revenue estimated at USD 1,495.0 million. Growing preference for advanced materials in the medical and automotive industry has seen a surge in nanotechnology R&D, which is expected to boost nanocoati...Read More »

October : 2015

Oilfield Equipment Market Analysis By Product (Drilling Equipment, Pumps & Valves, Field Production Machinery) And Segment Forecasts To 2020

Global oilfield equipment market size was estimated at USD 97.34 billion in 2013. High demand is resulting into increased crude yielding activities which in turn are expected to drive demand over the forecast period. In order to yield better results, there is need to develop high perform...Read More »

September : 2015

Thermal Barrier Coatings (TBC) Market By Product (Metal, Ceramic, Intermetallic), Technology (EB-PVD, HVOF, CVD, Air Plasma), Coating Combination (Ceramic YSZ, Al2O3, MCrAiY, Mullite-based), Application (Stationary Power Plants, Aerospace, Automotive) And Segment Forecasts To 2024

The global thermal barrier coatings market size was USD 12.40 Billion in 2015 and is expected to witness growth at a CAGR of over 6% from 2016 to 2024. These coatings form an integral part of exhaust heat management in several applications, including aerospace and automotive....Read More »

September : 2015

1-Decene Market Analysis By Application (Poly Alpha Olefin (PAO), Detergent Alcohol, Polyethylene) And Segment Forecasts To 2025

The global 1-decene market size exceeded USD 850 million in 2015. Increasing demand for synthetic lubricants, capacity expansions by key industry players and focus on the development of alpha olefins from bio-based materials is likely to propel the industry demand. The increasing popular...Read More »

September : 2015

Phthalic Anhydride Market Analysis By Application (Phthalate Plasticizers, Unsaturated Polyesters, Alkyd Resins) And Segment Forecasts To 2020

Global phthalic anhydride market size was estimated at USD 6.90 billion in 2013. Increasing use of phthalate plasticizers in automotive manufacturing coupled growing automotive industry is expected to drive demand over the forecast period. ...Read More »

September : 2015

Specialty Pulp And Paper Chemicals Market Analysis By Product (Basic, Functional, Bleaching, Process Chemicals) And Segment Forecasts To 2020

Specialty pulp and paper chemicals are chemicals which are used as raw materials to manufacture specialty paper. Specialty paper chemicals reduce the consumption of water and energy and save raw materials by reducing paper weight without hampering the optical and functional properties of...Read More »

September : 2015

1,3 Butadiene (BD) Market Analysis By Application (Butadiene Rubber, ABS, SBR, SB Latex, NBR, Hexamethylenediamine), Bio-based Opportunities And Segment Forecasts To 2020

1,3 butadiene, referred to as butadiene, is predominantly used as a monomer for the production of synthetic rubber in industries. Butadiene is produced as a byproduct in the steam cracking process of olefins and ethylene production. Dehydrogenation of butanes is another production proces...Read More »

September : 2015

U.S. Polymethyl Methacrylate (PMMA) Market Analysis By Product (Extruded Sheet, Cell Cast Sheets & Blocks, Pellets, Beads), By Application (Construction, Electronics, Automotive, Sings & Display) and Segment Forecasts To 2022

U.S. PMMA market size was 214.6 kilo tons in 2014. Increasing PMMA penetration across automotive and construction industries is expected to remain a key driving factor for the market over the forecast period....Read More »

September : 2015

Nitrogen Trifluoride (NF3) & Fluorine Gas (F2) Market Analysis By Application (Semiconductor Chips, Flat Panel Display, Solar Cells, Uranium Enrichment, Sulfur Hexafluoride, Electronic Cleaning) And Segment Forecasts To 2020

Nitrogen trifluoride (NF3) is an inorganic compound and has toxic, odorless, non-flammable properties. NF3 is manufactured by the reaction of hydrochloric acid (HCL) and ammonia (NH3) and primarily used in the cleaning of silicon wafers in semiconductor and solar energy applications....Read More »

September : 2015

Polyisobutylene (PIB) Market Analysis By Product (High Molecular Weight, Medium Molecular Weight, Low Molecular Weight), By Application (Automotive, Additive) And Segment Forecasts To 2024

The global polyisobutylene (PIB) market size was estimated at USD 4.33 billion in 2015. It is expected to witness significant growth owing to rising demand from end-use industries such as sealants, fuel additives, pharmaceutical, and automotive....Read More »

September : 2015

Polyvinyl Chloride (PVC) Market Analysis By Application (Construction, Consumer, Packaging, Electrical & Electronics, Transportation) And Segment Forecasts To 2020

Polyvinyl chloride (PVC) is a polymer plastic which is generally available in two forms, rigid and flexible. PVC is produced from vinyl chloride monomer by means of suspension, emulsion and bulk polymerization....Read More »

August : 2015

In-Line Process Viscometer (ILPV) Market Analysis By Technology (Rotational, Torsional Oscillation, Vibration, Moving Piston, Coriolis, Dynamic Fluid Pressure And Acoustic Wave), By Application (Petroleum, Chemicals, Pharmaceuticals And Food & Beverages) And Segment Forecasts To 2020

Viscometer is an instrument used for measuring viscosity in fluids either when the fluid is stagnant or the entity is stagnant. In-line process viscometers are widely used across various end-use industries such as petroleum, pharmaceuticals, foods and beverages and chemicals....Read More »

August : 2015

Plastics Market Analysis By Product (PE, PP, PVC, PET, Polystyrene, Engineering Thermoplastics), By Application (Film & Sheet, Injection Molding, Textiles, Packaging, Transportation, Construction) And Segment Forecasts To 2020

Plastics are wide array of semi-synthetic or synthetic organic solids that are transformed or molded into several useful products. Plastics are usually organic polymers derived from petrochemicals or sometimes occur naturally, and have high molecular weights....Read More »

August : 2015

North America Polyvinyl Chloride (PVC) Films Market Analysis By Technology (Calendering, Extrusion), By Product (Rigid PVC Films, Monomeric Flexible PVC Film, Polymeric Flexible PVC Film), By End-Use (Packaging, Medical, Printing, Building Materials) And Segment Forecasts To 2022

North America polyvinyl chloride films market size was 961.3 kilo tons in 2013. Rigid & flexible films are widely used in numerous packaging applications such as food packaging, pharmaceutical packaging, and consumer products packaging....Read More »

August : 2015

Medical Polymers Market Analysis By Product (Resins & Fibers, Elastomers, Biodegradable Plastics), By Application (Devices and Equipments, Packaging) and Segment Forecasts To 2020

The global medical polymers market size was valued at USD 9.69 billion in 2013, growing at a CAGR of 8.4% from 2014 to 2020. The global market is expected to witness growth owing to rising demand for lightweight polymer based devices from health care industry....Read More »

August : 2015

Solvent Market Analysis By Product (Hydrocarbons, Alcohols, Esters, Ketones, Chlorinated) By Application (Printing Inks, Paints And Coatings, Pharmaceuticals, Adhesives & Cosmetics) And Segment Forecasts To 2020

Solvent is a chemical, which liquefies in a chemically diverse solute to make a solution. Solvent can be in liquid form but is also available in gaseous and solid form. There are two variants of solvents namely conventional solvents and organic solvents....Read More »

August : 2015

Linear Alkyl Benzene (LAB) Market Analysis By Application (Heavy Duty Laundry Liquids, Laundry Powders, Light Duty Dish Washing Liquids, Industrial Cleaners, Household Cleaners) And Segment Forecasts To 2020

Global linear alkyl benzene market was 3,579.1 kilo tons in 2013. Positive outlook on household and industrial cleaners is expected to remain critical for LAB demand growth over the next six years. Increasing consumer spending is also expected to have a positive influence on the demand....Read More »

July : 2015

Polytetrafluoroethylene (PTFE) Market Analysis By Application (Industrial Processing, Electronics, Automotive & Transportation) By Product (Granular, Micro-powder, Fine-powder) And Segment Forecasts To 2020

Polytetrafluoroethylene (PTFE) is a synthetic high molecular weight solid state fluorocarbon consisting entirely of carbon and fluorine atoms and is also widely recognized as Dupont’s Teflon, commonly used in nonstick cookware. PTFE is commonly available in granular, micro-powder, ...Read More »

July : 2015

Mining Equipment Market Analysis by Product (Mining Drills & Breakers, Crushing, Pulverizing & Screening Equipment, Mineral Processing Machinery, Surface Mining Equipment, Underground Mining Machinery) By Application And Segment Forecasts To 2022

Growing mining activities on a global level are expected to be the key driving force for the global mining equipment market over the next six years. Mining activities are particularly prevalent in Asia Pacific nations of China, India and Australia....Read More »

July : 2015

Formaldehyde Market Analysis By Application (UF Resins, PF Resins, MF Resins, Polyacetal Resins, Pentaerythritol, Methylenebis, 1,4-butanediol), By End User (Construction, Automotive, Furniture) And Segment Forecasts To 2020

Formaldehyde is a colorless gaseous substance with a pungent smell. Formaldehyde is an important feedstock component for production of many chemicals and materials. The major use of this substance is for production of urea-alkyd resins....Read More »

July : 2015

Acetic Acid Market Analysis By Application (VAM, Acetic Anhydride, Acetate Esters, PTA) And Segment Forecasts To 2022

Global acetic acid market is expected to grow on account of its increasing demand for manufacturing VAM and PTA. In addition, its use as a chemical reagent for manufacturing monochloroacetic acid, camphor, diketene and photographic chemicals is also expected to be a critical factor for d...Read More »

July : 2015

Global Solution Styrene Butadiene Rubber Market Analysis By Application (Tires, Footwear, Polymer Modification, Adhesives & Sealants, Others) And Segment Forecasts To 2022

Global solution styrene butadiene rubber market size was estimated at USD 4.16 billion in 2014. Growing demand for solution styrene butadiene rubber in tire manufacturing industry owing to improved performance and longevity is expected to propel demand over the forecast period....Read More »

July : 2015

U.S. Hair Brush Market Analysis By Application (Personal, Professional) And Segment Forecasts To 2022

The U.S. hair brush market is expected to grow significantly over the forecast period owing to increasing health and hygiene awareness. Hair brushes are used by majority of age groups including children, teenagers and adults for detangling, styling and smoothing of human hair....Read More »

June : 2015

Non Halogenated Flame Retardants Market Analysis By Product (Aluminum Hydroxide, Phosphorous Based), By Application (Polyolefins, Epoxy Resin, UPE, PVC, ETP, Rubber, Styrenics), By End Use Industry (Electrical, Construction, Transportation) And Segment Forecasts To 2020

Flame retardants restrain or delay flame production to avert the spread of fire. These are added (additive) or chemically bonded (reactive) to the base material to induce fire retardancy to the manufactured products, mostly polymers and textiles. ...Read More »

June : 2015

Seed Treatment Market Analysis By Treatment Type (Insecticides, Fungicides, Chemical, Non-Chemical), By Crop (Corn, Soybean, Wheat, Canola, Cotton) And Segment Forecasts To 2020

Global seed treatment market was worth USD 2.98 billion in 2013. The global market is poised for growth owing to the growing research & development initiatives to improve the seeds potential of genetic yielding. This enhancement of the seeds potential leads to an increase in its overall productivity....Read More »

June : 2015

Bisphenol A (BPA) Market Analysis By Application (Polycarbonates, Epoxy resins) and Segment Forecasts To 2020

Bisphenol A (BPA) is a synthetic compound derived from styrene, acrylonitrile and butadiene. It is primarily used to produce polycarbonate and is one of the key monomer in producing epoxy resins. ...Read More »

June : 2015

Ethylene Glycols Market Analysis By Product (MEG, DEG, TEG), By Application (PET, Polyester Fibers, Antifreeze, Films) And Segment Forecasts To 2020

When ethylene oxide is processed further, it forms a sweet tasting colorless liquid called ethylene glycol/ monoethylene glycol (MEG). MEG is the most widely used glycol in the global market. Manufacture of MEG from ethylene oxide coproduces diethylene glycol (DEG) and triethylene glycol...Read More »

June : 2015

Synthetic and Bio-Based Polypropylene Market Analysis By Application (Injection Molding, Textiles and Films) And Segment Forecasts To 2022

Global polypropylene market demand was 55.83 million tons in 2013. Strong end-use industries demand is slated to positively impact the global polypropylene market over the forecast period. Polypropylene has several applications spread across numerous industries, making it an indispensabl...Read More »

June : 2015

North America Concrete Floor Coatings Market Analysis By Product (Epoxy, Polyurethanes, Polyaspartics), By Application (Indoor, Outdoor) And Segment Forecasts To 2020

North America concrete floor coatings market demand was 214.3 kilo tons in 2013 and is expected to reach 329.0 kilo tons by 2020, growing at a CAGR of 6.3% from 2014 to 2020. Concrete floor coatings are used for providing excellent resistance against wear & tear, and high temperature...Read More »

May : 2015

Thermic Fluids Market Analysis By Product (Mineral Oils, Aromatics, Glycols, Silicones), By Application (Oil & Gas, Food & Beverages, Chemical Industry, CSP, Plastics, Pharmaceuticals, HVAC) And Segment Forecasts To 2020

Thermic fluids have various applications in number of processes across various industries. These fluids are required to maintain the temperature of the processing machines and carry the heat energy which is produced during the process. ...Read More »

April : 2015

Textile Chemicals Market Analysis By Product (Coating & Sizing, Colorants & Auxiliaries, Finishing Agents, Surfactants, Desizing Agents, Bleaching Agents, Yarn Lubricants) And Segment Forecast To 2020

Global Textile Chemicals market size was 9.23 million tons in 2013. In terms of revenue, this market is expected to grow at a CAGR of 3.7% from 2014 to 2020. Textile Chemicals are used to optimize and improve the manufacturing process and endow the final product with an exact desirable a...Read More »

April : 2015

PP (Polypropylene) Nonwoven Fabric Market Analysis By Product (Spunbonded, Staples, Meltblown, Composite) And Segment Forecast To 2020

Polypropylene nonwoven fabric has been increasingly gaining acceptance and importance in the recent past owing to its superior quality over other nonwoven fabric mainly for manufacturing hygiene products. Polypropylene (fiber and polymer) is the leading raw material used for manufacturin...Read More »

April : 2015

Antimicrobial Coatings Market Analysis And Segment Forecasts To 2020

Antimicrobial coatings are used to protect surfaces from micro-organisms including parasites, bacteria, germs and fungi. Initially introduced to inhibit the effect of micro-organisms in the surfaces to which they were applied to; increasing health concerns regarding the effect of such mi...Read More »

March : 2015

Nylon Monofilament Market Analysis By Product (Nylon 6, Nylon 66), By Application (Fishing Net, Medical, Automotive, Consumer Goods) And Segment Forecasts To 2020

Global nylon monofilament market demand was 324.0 kilo tons in 2012. Growing fishing industry and strong automotive demand are projected to positively impact the global nylon monofilament market. Rising fish food demand is slated to bolster the fishing industry. This is further presumed ...Read More »

March : 2015

Nitrile Butadiene Rubber (NBR) Market Analysis By Application (Hose, Belting & Cable, Adhesives & Sealants, Industrial & Medical Gloves, Seals & O-Rings, Molded & Extruded Products), By End-use (Automotive, Machinery, Cots & Aprons, Construction, Plastic Modification and Wires & Cables) And Segment Forecasts To 2020

Rising demand for high quality plasticizers on account of their excellent mechanical properties is likely to be a key driver for the global nitrile butadiene rubber (NBR) market over the next six years. Furthermore, increasing demand for NBR in the manufacture of various automotive compo...Read More »

March : 2015

Thermoplastic Vulcanizates (TPV) Market Analysis By Application (Automotive, Fluid Handling, Consumer Goods, Medical) and Segment Forecasts to 2020

Strong demand for light weight materials with superior properties, particularly from the automobile industry is presumed to be a key driving factor for global TPV market. Strong shift n trend towards replacing metals with light weight materials such as TPV in order to increase fuel effic...Read More »

March : 2015

Neem Extracts Market Analysis By Application (Pharmaceuticals, Personal Care, Biofertilizers, Animal Feed) And Segment Forecasts To 2020

Global neem extracts market is expected to witness growth on account of rising demand from various end-use industries including personal care, pharmaceutical, animal feed and agriculture. Furthermore, increasing consumer awareness about health benefits of neem, particularly in developed ...Read More »

March : 2015

Chemical Tanker Shipping Market Analysis By Product (Organic, Inorganic, Vegetable/Animal Oils), By Cargo Size (Inland, Coastal, Deep Sea), By Cargo Type (IMO I, IMO II, IMO III) And Segment Forecasts To 2020

Global chemical tanker shipping market was 192.40 million tons in 2012. Shift in trend towards exploration of unconventional resources such as shale gas/oil has helped in increasing petrochemicals output in the recent past. Increasing petrochemical production on account of growth of majo...Read More »

March : 2015

Polyethylene Glycol (PEG) Market Analysis By Application (Medical, Personal Care, Industrial) And Segment Forecasts To 2020

Global polyethylene glycol (PEG) market is expected to witness growth on account of rising importance of material properties such as non-toxicity, wear resistance and solubility in organic solvents. Emergence of PEG as a lubricating solution in pharmaceutical industry on account of it ex...Read More »

March : 2015

Adhesives and Sealants Market Analysis By Technology (Water-based, Solvent-based, Hot Melt, Reactive), By Product (Acrylic, Polyurethane, Polyvinyl Acetate (PVA), Epoxy, EVA), By Application (Pressure Sensitive, Construction, Automotive, Packaging, Furniture) and Segment Forecasts To 2020

Adhesives refers to any binding substance applied to the surface of other materials to avoid separation. Adhesives were commercially developed in 1960 and are available in both natural and synthetic form. On the other hand sealants are available in the form of a viscous material with lit...Read More »

March : 2015

Styrene Butadiene Rubber (SBR) Market Analysis And Segment Forecasts To 2020

SBR is a form of synthetic rubber manufactured by the polymerization of butadiene with styrene in the ratio of 3:1. SBR is manufactured by the polymerization of styrene and butadiene using two different processes. SBR is commercially available as solution (S-SBR) or as an emulsion (E-SBR...Read More »

February : 2015

Biocides Market Analysis By Product (Halogen Compounds, Metallic Compounds, Organosulfurs, Organic acids, Phenolic, Nitrogen), By Application (Water treatment, Food & beverage, Personal care, Wood Preservation, Paints & Coatings, HVAC, Boilers, Oil & Gas, Fuels) And Segment Forecasts To 2022

The global biocides market size was estimated at USD 7.99 billion in 2014. Rising demand from industrial applications, particularly in paints & coatings, water treatment and personal care coupled with the dynamic expansion of these end-use industries is expected to drive biocides mar...Read More »

February : 2015

Pentaerythritol Market Analysis by Application (Alkyd Paints, Alkyd Inks, Alkyd Adhesives & Sealants, Plasticizers, Alkyd Varnishes, Radiation Cure Coatings, Lubricants) And Segment Forecasts To 2020

Global pentaerythritol market demand was 514.7 kilo tons in 2012. Growing demand for stable polyols across various derivatives manufacturing industries is expected to drive global pentaerythriol market over the next few years. ...Read More »

February : 2015

Proppants Market Analysis By Product (Sand, Resin Coated, Ceramic), By Application (Shale Gas, Tight Gas, Coal Bed Methane, Others) And Segment Forecasts To 2020

Global proppants market is expected to witness significant demand growth in hydraulic fracturing as it helps keep fractures open and impart high permeability to unconventional plays. Large technically recoverable reserves in Asia Pacific coupled with increasing consumption of proppant pe...Read More »

February : 2015

IPM Pheromones Market Analysis By Product (Sex pheromones, Aggregation pheromones, Oviposition-Deterring pheromones, Alarm pheromones) And Segment Forecasts To 2020

IPM pheromones market is expected to witness growth owing to increasing food demand from regions with high birth ratio such as Asia Pacific and Africa. Growing world population is expected to result in increasing food consumption rising need for higher agricultural yields....Read More »

February : 2015

South East Asia Polyurethane (PU) Adhesives Market Analysis By Application (Footwear, Automotive, Construction, Packaging) And Segment Forecasts To 2020

South East Asian polyurethane (PU) adhesives market demand was 44.0 kilo tons in 2012. Growth of major end-use industries such as automotive, footwear, construction and packaging is expected to drive regional PU adhesives market over the next six years. Vietnam is one of the largest manu...Read More »

January : 2015

Rigid Polyurethane (PU) Foams Market Analysis By Product (Molded Foam Parts, Slabstock Polyether, Slabstock Polyester) And Segment Forecasts To 2020

Growth of construction industry mainly in the emerging economies of China, India and Brazil is expected to boost the demand for rigid polyurethane foams over the next decade. Polyurethane exists in various forms ranging from rigid or flexible foams to stiff and strong elastomers. Rigid a...Read More »

January : 2015

Technical Textile Chemicals Market Analysis By Application (Agrotech, Buildtech,Geotech, Medtech, Miltech, Packtech, Protech, Transtech) And Segment Forecasts To 2020

Global technical textile chemicals market demand was 1,591.3 kilo tons in 2012. Increasing demand for technical textiles particularly from automotive industry is expected to drive global technical textiles market. Product and application development is also expected to complement the mar...Read More »

January : 2015

Staples PP (Polypropylene) Nonwoven Fabric Market Analysis By Application (Hygiene, Industrial, Medical, Geotextiles, Furniture, Carpet, Agriculture) And Segment Forecasts To 2020

Global staples PP nonwoven fabric market demand was 1,835 kilo tons in 2012. Staples PP nonwoven fabric market has witnessed a surge in demand owing to its increasing use for manufacturing hygiene products such as diapers, feminine hygiene products, adult incontinence and wipes....Read More »

January : 2015

Polymethyl Methacrylate (PMMA) Market Analysis By Application (Construction, Electronics, Automotive, Signs & Display), By Product (Extruded Sheets, Cell Cast Sheet & Blocks, Pellets, Beads) And Segment Forecasts To 2020

Polymethyl methacrylate (PMMA) is a thermoplastic polymer of methyl methacrylate (MMA). It is a clear, strong and lightweight plastic generally used as a substitute to glass due to its energy efficiency and weather resistance. It is available in two grades and can be classified as optica...Read More »

January : 2015

Clear Brine Fluids Market Analysis By Product (Potassium Chloride, Calcium Chloride, Sodium Chloride, Potassium Bromide, Sodium Bromide, Calcium Bromide) And Segment Forecasts To 2020

The global clear brine fluids market was priced at USD 926.7 million in 2013. Countries including Egypt, Gulf of Mexico, the U.S., China, and Russia have experienced an increase in the drilling activities due to rising demand for energy....Read More »

January : 2015

Vinyl Acetate Monomer (VAM) Market Analysis By Application (Polyvinyl Acetate, Polyvinyl Alcohol, Ethylene Vinyl Acetate, Ethylene Vinyl Alcohol) And Segment Forecasts To 2020

Growth of global adhesives industry on account of increasing demand from major end-use industries such as furniture automobiles and construction is expected to remain a key driving factor for global vinyl acetate monomer (VAM) market over the next six years....Read More »

January : 2015

Oil And Gas Drill Bit Market Analysis By Product (Roller-cone, Milled-tooth Bit, Tungsten Carbide Inserts, Polycrystalline Diamond Cutters (PDC), Natural or Synthetic Diamond Cutters, Fixed Cutter) And Segment Forecasts To 2020

Global oil and gas drill bit market size was valued at USD 4.90 billion in 2014. High rate of fossil fuel extraction to meet the surging global energy demand has been a major factor driving the market growth since the past few years. Large scale drilling and Exploration and Production (E...Read More »

December : 2014

Unsaturated Polyester Resin (UPR) Market Analysis By Product (DCPD, Orthopthalic, Isopthalic), By End-Use (Pipes & Tanks, Building & Construction, Electrical, Marine, Transport, Artificial Stones) And Segment Forecasts To 2020

Global UPR market is expected to witness growth owing to commercial use in FRP (Fiberglass Reinforced Plastics) which have extensive applications in the construction industry. Increasing construction activities as a result of infrastructure development in emerging economies of Asia Pacif...Read More »

November : 2014

Butane Market Analysis By Application (LPG, Petrochemicals, Refinery) And Segment Forecasts To 2020

Increasing demand for liquid petroleum gas (LPG) on account of its growing adoption as a domestic fuel in Asia Pacific and Africa is expected to remain a key driving factor for the global butane market. Governments across these regions have been promoting the use of LPG as domestic fuel ...Read More »

November : 2014

Polyurethane (PU) Market Analysis By Product (Rigid Foam, Flexible Foam, Coatings, Adhesives & Sealants, Elastomers), By End-use (Furniture and Interiors, Construction, Electronics & Appliances, Automotive, Footwear, Packaging) And Segment Forecasts To 2020

Global polyurethane market demand was 14,950 kilo tons in 2012. The market is expected to witness significant growth owing to its widespread use in construction in the form of sealants, thermal insulators and flooring materials....Read More »

October : 2014

Latin America Adhesives And Sealants Market Analysis By Technology (Water-Based, Solvent-Based, Hot Melt, Reactive), By Product (Acrylic, PVA, Polyurethane), By Application (Pressure Sensitive Applications, Construction, Automotive) And Segment Forecasts To 2020

The demand for adhesives and sealants in Latin America has been primarily driven by Brazil, which is one of the fastest growing economies in the world. Brazilian market for adhesives is expected to reach a market worth USD 1,168.6 million by 2020, growing at an estimated CAGR of 6.6...Read More »

August : 2014

Ethylene Oxide Market By Application (Monoethylene Glycol, Ethoxylates, Ethanolamine, Diethylene & Triethylene Glycols, Polyols, Polyethylene)Analysis And Segment Forecasts To 2020

Ethylene oxide is also known as oxirane which is an organic compound.It’s a colorless and flammable gas. Ethylene oxide is widely used across various industries for production of solvents, detergents, adhesives, antifreeze, textiles, and pharmaceuticals. Ethylene oxideis also prese...Read More »

June : 2014

Concrete Floor Coatings Market Analysis By Product (Epoxy, Polyaspartics), By Application (Indoor, Outdoor) And Segment Forecasts To 2020

Concrete floor coatings have the ability of exhibiting excellent resistance against wear, tear, abrasion and heat. Gaining popularity of epoxy resins on account of exhibiting excellent mechanical properties and high heat resistance is expected to play an important role in driving the con...Read More »

June : 2014

Polyethylene (PE) Wax Market Analysis By Technology (Polymerization, Modification, Thermal Cracking), By Product (HDPPE, LDPPE, Oxidized, Acid-Modified, Low-Density Cracked), By Application (Printing Ink, Adhesive, Masterbatch, Plastic, Rubber) And Segment Forecasts To 2022

The global polyethylene wax market size was estimated at 302.1 kilo tons in 2013. Rising shale exploration in North America is expected to ensure continuous supply of ethylene, a key raw material for manufacturing PE wax....Read More »

June : 2014

Asia Pacific (India, China, Japan) Adhesives And Sealants Market Analysis By Technology (Water-Based, Solvent-Based, Hot Melt, Reactive), By Product (Acrylic, PVA, Polyurethane), By Application (Pressure Sensitive Applications, Construction, Automotive) And Segment Forecasts To 2020

Asia Pacific is the largest consumer for adhesives and sealants in the global market. The region accounted for 42.6% of total adhesives consumed globally in 2013. The growth of adhesives in this region is primarily driven by rapid industrialization, strong GDP growth, and rise in manufac...Read More »

May : 2014

Adipic Acid Market Analysis By Application (Nylon 6,6 Fiber, Nylon 6,6 Resin, Polyurethane, Adipate Ester) And Segment Forecasts To 2020

Global adipic acid market size was estimated at USD 4.55 billion in 2013. Growing electronics and automotive industry, specifically in Asia Pacific, is expected to drive the market demand over the forecast period....Read More »

February : 2014

To schedule a free analyst call, please complete the form below.

Your personal details are safe & secure. Privacy policy

Why Choose Us

24/5 Research support

Get your queries resolved from an industry expert. Request for a free product review before report purchase.

Custom research service

Speak to the report author to design an exclusive study to serve your research needs.

Quality assurance

A testimonial for service excellence represented in the form of BBB "A" Accreditation.

Information security

Your personal and confidential information is safe and secure.