Injection Molded Plastic Market Size, Share & Trends Report

Injection Molded Plastic Market Size, Share & Trends Analysis Report By Raw Material (PP, ABS, HDPE, LDPE, PS, PE, PVC, PET, PU, PEEK), By Application (Packaging, Building & Construction, Automotive & Transportation, Electrical & Electronics, Medical), By Region, And Segment Forecasts, 2024 - 2030

Report ID: 978-1-68038-128-3
Number of Pages: 134
Format: Electronic (PDF)

Historical Range: 2019 - 2023
Industry: Bulk Chemicals

Market Segmentation

Injection Molded Plastics Raw Material Outlook (Volume, Kilotons; Revenue, USD Million, 2019 - 2030)
- Polypropylene (PP)
- Acrylonitrile Butadiene Styrene (ABS)
- High-Density Polyethylene (HDPE)
- Low-Density Polyethylene (LDPE)
- Polystyrene (PS)
- Polyethylene (PE)
- Polyvinyl Chloride (PVC)
- Polyethylene Terephthalate (PET)
- Polyurethane (PU)
- Polyether Ether Ketone (PEEK)
- Others
Injection Molded Plastics Application Outlook (Volume, Kilotons; Revenue, USD Million, 2019 - 2030)
- Packaging
- Consumables & Electronics
- Automotive & Transportation
- Building & Construction
- Medical
- Others
Injection Molded Plastics Regional Outlook (Volume, Kilotons; Revenue, USD Million, 2019 - 2030)
- North America
  - North America Injection Molded Plastics Market, By raw material
    - Polypropylene (PP)
    - Acrylonitrile Butadiene Styrene (ABS)
    - High-Density Polyethylene (HDPE)
    - Low-Density Polyethylene (LDPE)
    - Polystyrene (PS)
    - Polyethylene (PE)
    - Polyvinyl Chloride (PVC)
    - Polyethylene Terephthalate (PET)
    - Polyurethane (PU)
    - Polyether Ether Ketone (PEEK)
    - Others
  - North America Injection Molded Plastics Market, By Application
    - Packaging
    - Consumables & Electronics
    - Automotive & Transportation
    - Building & Construction
    - Medical
    - Others
  - U.S.
    - U.S. Injection Molded Plastics Market, By raw material
      - Polypropylene (PP)
      - Acrylonitrile Butadiene Styrene (ABS)
      - High-Density Polyethylene (HDPE)
      - Low-Density Polyethylene (LDPE)
      - Polystyrene (PS)
      - Polyethylene (PE)
      - Polyvinyl Chloride (PVC)
      - Polyethylene Terephthalate (PET)
      - Polyurethane (PU)
      - Polyether Ether Ketone (PEEK)
      - Others
    - U.S. Injection Molded Plastics Market, By Application
      - Packaging
      - Consumables & Electronics
      - Automotive & Transportation
      - Building & Construction
      - Medical
      - Others
  - Canada
  - Mexico
    - Mexico Injection Molded Plastics Market, By raw material
      - Polypropylene (PP)
      - Acrylonitrile Butadiene Styrene (ABS)
      - High-Density Polyethylene (HDPE)
      - Low-Density Polyethylene (LDPE)
      - Polystyrene (PS)
      - Polyethylene (PE)
      - Polyvinyl Chloride (PVC)
      - Polyethylene Terephthalate (PET)
      - Polyurethane (PU)
      - Polyether Ether Ketone (PEEK)
      - Others
    - Mexico Injection Molded Plastics Market, By Application
      - Packaging
      - Consumables & Electronics
      - Automotive & Transportation
      - Building & Construction
      - Medical
      - Others
- Europe
  - Europe Injection Molded Plastics Market, By raw material
    - Polypropylene (PP)
    - Acrylonitrile Butadiene Styrene (ABS)
    - High-Density Polyethylene (HDPE)
    - Low-Density Polyethylene (LDPE)
    - Polystyrene (PS)
    - Polyethylene (PE)
    - Polyvinyl Chloride (PVC)
    - Polyethylene Terephthalate (PET)
    - Polyurethane (PU)
    - Polyether Ether Ketone (PEEK)
    - Others
  - Europe Injection Molded Plastics Market, By Application
    - Packaging
    - Consumables & Electronics
    - Automotive & Transportation
    - Building & Construction
    - Medical
    - Others
  - Germany
    - Germany Injection Molded Plastics Market, By raw material
      - Polypropylene (PP)
      - Acrylonitrile Butadiene Styrene (ABS)
      - High-Density Polyethylene (HDPE)
      - Low-Density Polyethylene (LDPE)
      - Polystyrene (PS)
      - Polyethylene (PE)
      - Polyvinyl Chloride (PVC)
      - Polyethylene Terephthalate (PET)
      - Polyurethane (PU)
      - Polyether Ether Ketone (PEEK)
      - Others
    - Germany Injection Molded Plastics Market, By Application
      - Packaging
      - Consumables & Electronics
      - Automotive & Transportation
      - Building & Construction
      - Medical
      - Others
  - France
  - U.K.
    - U.K. Injection Molded Plastics Market, By raw material
      - Polypropylene (PP)
      - Acrylonitrile Butadiene Styrene (ABS)
      - High-Density Polyethylene (HDPE)
      - Low-Density Polyethylene (LDPE)
      - Polystyrene (PS)
      - Polyethylene (PE)
      - Polyvinyl Chloride (PVC)
      - Polyethylene Terephthalate (PET)
      - Polyurethane (PU)
      - Polyether Ether Ketone (PEEK)
      - Others
    - U.K. Injection Molded Plastics Market, By Application
      - Packaging
      - Consumables & Electronics
      - Automotive & Transportation
      - Building & Construction
      - Medical
      - Others
  - Italy
    - Italy Injection Molded Plastics Market, By raw material
      - Polypropylene (PP)
      - Acrylonitrile Butadiene Styrene (ABS)
      - High-Density Polyethylene (HDPE)
      - Low-Density Polyethylene (LDPE)
      - Polystyrene (PS)
      - Polyethylene (PE)
      - Polyvinyl Chloride (PVC)
      - Polyethylene Terephthalate (PET)
      - Polyurethane (PU)
      - Polyether Ether Ketone (PEEK)
      - Others
    - Italy Injection Molded Plastics Market, By Application
      - Packaging
      - Consumables & Electronics
      - Automotive & Transportation
      - Building & Construction
      - Medical
      - Others
  - Spain
    - Spain Injection Molded Plastics Market, By raw material
      - Polypropylene (PP)
      - Acrylonitrile Butadiene Styrene (ABS)
      - High-Density Polyethylene (HDPE)
      - Low-Density Polyethylene (LDPE)
      - Polystyrene (PS)
      - Polyethylene (PE)
      - Polyvinyl Chloride (PVC)
      - Polyethylene Terephthalate (PET)
      - Polyurethane (PU)
      - Polyether Ether Ketone (PEEK)
      - Others
    - Spain Injection Molded Plastics Market, By Application
      - Packaging
      - Consumables & Electronics
      - Automotive & Transportation
      - Building & Construction
      - Medical
      - Others
- Asia Pacific
  - Asia Pacific Injection Molded Plastics Market, By raw material
    - Polypropylene (PP)
    - Acrylonitrile Butadiene Styrene (ABS)
    - High-Density Polyethylene (HDPE)
    - Low-Density Polyethylene (LDPE)
    - Polystyrene (PS)
    - Polyethylene (PE)
    - Polyvinyl Chloride (PVC)
    - Polyethylene Terephthalate (PET)
    - Polyurethane (PU)
    - Polyether Ether Ketone (PEEK)
    - Others
  - Asia Pacific Injection Molded Plastics Market, By Application
    - Packaging
    - Consumables & Electronics
    - Automotive & Transportation
    - Building & Construction
    - Medical
    - Others
  - China
    - China Injection Molded Plastics Market, By raw material
      - Polypropylene (PP)
      - Acrylonitrile Butadiene Styrene (ABS)
      - High-Density Polyethylene (HDPE)
      - Low-Density Polyethylene (LDPE)
      - Polystyrene (PS)
      - Polyethylene (PE)
      - Polyvinyl Chloride (PVC)
      - Polyethylene Terephthalate (PET)
      - Polyurethane (PU)
      - Polyether Ether Ketone (PEEK)
      - Others
    - China Injection Molded Plastics Market, By Application
      - Packaging
      - Consumables & Electronics
      - Automotive & Transportation
      - Building & Construction
      - Medical
      - Others
  - South Korea
  - Japan
    - Japan Injection Molded Plastics Market, By raw material
      - Polypropylene (PP)
      - Acrylonitrile Butadiene Styrene (ABS)
      - High-Density Polyethylene (HDPE)
      - Low-Density Polyethylene (LDPE)
      - Polystyrene (PS)
      - Polyethylene (PE)
      - Polyvinyl Chloride (PVC)
      - Polyethylene Terephthalate (PET)
      - Polyurethane (PU)
      - Polyether Ether Ketone (PEEK)
      - Others
    - Japan Injection Molded Plastics Market, By Application
      - Packaging
      - Consumables & Electronics
      - Automotive & Transportation
      - Building & Construction
      - Medical
      - Others
  - India
    - India Injection Molded Plastics Market, By raw material
      - Polypropylene (PP)
      - Acrylonitrile Butadiene Styrene (ABS)
      - High-Density Polyethylene (HDPE)
      - Low-Density Polyethylene (LDPE)
      - Polystyrene (PS)
      - Polyethylene (PE)
      - Polyvinyl Chloride (PVC)
      - Polyethylene Terephthalate (PET)
      - Polyurethane (PU)
      - Polyether Ether Ketone (PEEK)
      - Others
    - India Injection Molded Plastics Market, By Application
      - Packaging
      - Consumables & Electronics
      - Automotive & Transportation
      - Building & Construction
      - Medical
      - Others
    - Indonesia
      - Indonesia Injection Molded Plastics Market, By raw material
        
        Polypropylene (PP)
        
        Acrylonitrile Butadiene Styrene (ABS)
        
        High-Density Polyethylene (HDPE)
        
        Low-Density Polyethylene (LDPE)
        
        Polystyrene (PS)
        
        Polyethylene (PE)
        
        Polyvinyl Chloride (PVC)
        
        Polyethylene Terephthalate (PET)
        
        Polyurethane (PU)
        
        Polyether Ether Ketone (PEEK)
        
        Others
      - Indonesia Injection Molded Plastics Market, By Application
        
        Packaging
        
        Consumables & Electronics
        
        Automotive & Transportation
        
        Building & Construction
        
        Medical
        
        Others
    - Malaysia
      - Malaysia Injection Molded Plastics Market, By raw material
        
        Polypropylene (PP)
        
        Acrylonitrile Butadiene Styrene (ABS)
        
        High-Density Polyethylene (HDPE)
        
        Low-Density Polyethylene (LDPE)
        
        Polystyrene (PS)
        
        Polyethylene (PE)
        
        Polyvinyl Chloride (PVC)
        
        Polyethylene Terephthalate (PET)
        
        Polyurethane (PU)
        
        Polyether Ether Ketone (PEEK)
        
        Others
      - Malaysia Injection Molded Plastics Market, By Application
        
        Packaging
        
        Consumables & Electronics
        
        Automotive & Transportation
        
        Building & Construction
        
        Medical
        
        Others
    - Australia
      - Australia Injection Molded Plastics Market, By raw material
        
        Polypropylene (PP)
        
        Acrylonitrile Butadiene Styrene (ABS)
        
        High-Density Polyethylene (HDPE)
        
        Low-Density Polyethylene (LDPE)
        
        Polystyrene (PS)
        
        Polyethylene (PE)
        
        Polyvinyl Chloride (PVC)
        
        Polyethylene Terephthalate (PET)
        
        Polyurethane (PU)
        
        Polyether Ether Ketone (PEEK)
        
        Others
      - Australia Injection Molded Plastics Market, By Application
        
        Packaging
        
        Consumables & Electronics
        
        Automotive & Transportation
        
        Building & Construction
        
        Medical
        
        Others
    - New Zealand
      - New Zealand Injection Molded Plastics Market, By raw material
        
        Polypropylene (PP)
        
        Acrylonitrile Butadiene Styrene (ABS)
        
        High-Density Polyethylene (HDPE)
        
        Low-Density Polyethylene (LDPE)
        
        Polystyrene (PS)
        
        Polyethylene (PE)
        
        Polyvinyl Chloride (PVC)
        
        Polyethylene Terephthalate (PET)
        
        Polyurethane (PU)
        
        Polyether Ether Ketone (PEEK)
        
        Others
      - New Zealand Injection Molded Plastics Market, By Application
        
        Packaging
        
        Consumables & Electronics
        
        Automotive & Transportation
        
        Building & Construction
        
        Medical
        
        Others
- Central & South America
  - Central & South America Injection Molded Plastics Market, By raw material
    - Polypropylene (PP)
    - Acrylonitrile Butadiene Styrene (ABS)
    - High-Density Polyethylene (HDPE)
    - Low-Density Polyethylene (LDPE)
    - Polystyrene (PS)
    - Polyethylene (PE)
    - Polyvinyl Chloride (PVC)
    - Polyethylene Terephthalate (PET)
    - Polyurethane (PU)
    - Polyether Ether Ketone (PEEK)
    - Others
  - Central & South America Injection Molded Plastics Market, By Application
    - Packaging
    - Consumables & Electronics
    - Automotive & Transportation
    - Building & Construction
    - Medical
    - Others
  - Brazil
    - Brazil Injection Molded Plastics Market, By raw material
      - Polypropylene (PP)
      - Acrylonitrile Butadiene Styrene (ABS)
      - High-Density Polyethylene (HDPE)
      - Low-Density Polyethylene (LDPE)
      - Polystyrene (PS)
      - Polyethylene (PE)
      - Polyvinyl Chloride (PVC)
      - Polyethylene Terephthalate (PET)
      - Polyurethane (PU)
      - Polyether Ether Ketone (PEEK)
      - Others
    - Brazil Injection Molded Plastics Market, By Application
      - Packaging
      - Consumables & Electronics
      - Automotive & Transportation
      - Building & Construction
      - Medical
      - Others
  - Argentina
  - Argentina Injection Molded Plastics Market, By Application
    - Packaging
    - Consumables & Electronics
    - Automotive & Transportation
    - Building & Construction
    - Medical
    - Others
- Middle East & Africa
  - Middle East & Africa Injection Molded Plastics Market, By raw material
    - Polypropylene (PP)
    - Acrylonitrile Butadiene Styrene (ABS)
    - High-Density Polyethylene (HDPE)
    - Low-Density Polyethylene (LDPE)
    - Polystyrene (PS)
    - Polyethylene (PE)
    - Polyvinyl Chloride (PVC)
    - Polyethylene Terephthalate (PET)
    - Polyurethane (PU)
    - Polyether Ether Ketone (PEEK)
    - Others
  - Middle East & Africa Injection Molded Plastics Market, By Application
    - Packaging
    - Consumables & Electronics
    - Automotive & Transportation
    - Building & Construction
    - Medical
    - Others
  - Saudi Arabia
    - Saudi Arabia Injection Molded Plastics Market, By raw material
      - Polypropylene (PP)
      - Acrylonitrile Butadiene Styrene (ABS)
      - High-Density Polyethylene (HDPE)
      - Low-Density Polyethylene (LDPE)
      - Polystyrene (PS)
      - Polyethylene (PE)
      - Polyvinyl Chloride (PVC)
      - Polyethylene Terephthalate (PET)
      - Polyurethane (PU)
      - Polyether Ether Ketone (PEEK)
      - Others
    - Saudi Arabia Injection Molded Plastics Market, By Application
      - Packaging
      - Consumables & Electronics
      - Automotive & Transportation
      - Building & Construction
      - Medical
      - Others
  - UAE
  - South Africa
    - South Africa Injection Molded Plastics Market, By raw material
      - Polypropylene (PP)
      - Acrylonitrile Butadiene Styrene (ABS)
      - High-Density Polyethylene (HDPE)
      - Low-Density Polyethylene (LDPE)
      - Polystyrene (PS)
      - Polyethylene (PE)
      - Polyvinyl Chloride (PVC)
      - Polyethylene Terephthalate (PET)
      - Polyurethane (PU)
      - Polyether Ether Ketone (PEEK)
      - Others
    - South Africa Injection Molded Plastics Market, By Application
      - Packaging
      - Consumables & Electronics
      - Automotive & Transportation
      - Building & Construction
      - Medical
      - Others

Injection Molded Plastic Market Dynamics

Driver: Increasing penetration in automotive applications

The growth of the injection-molded plastics industry is directly proportional to the growth of the automotive industry, and it is their dominating end-use segment. The growth in the automotive industry, particularly in the Asia Pacific region, has stabilized the global market and paved the way for the injection-molded plastics industry to grow. Furthermore, with rising technological innovations in automotive components, thermoplastic elastomers, and other injection-molded plastics, the automobile industry has developed new applications for the injection-molded plastics market. Moreover, the industry-wide need for lightweight materials has led toward plastic’s exploration as a viable alternative for the formerly used steel auto components. Consequently, the market is anticipated to grow further over the forecast period.

Driver: Growing construction spending in emerging markets

Injection molded plastics find applications in varied markets; however, it is primarily utilized in construction, packaging and automotive industries. This is attributed to the growing demand for injection molded products in these industries, specifically in the Asia Pacific and Latin America regions. In the building and construction industry, injection molded plastics have become a popular choice for applications such as flooring, roofing, insulation, walls, doors, and windows. Their use in this sector provides a cost-effective alternative to traditional materials.

China stands as a major player in the production and consumption of these plastics, with the global market’s expansion closely linked to China’s own industry growth. Factors such as rising income levels and an improving standard of living among China’s large and growing population further fuel this market growth. As living standards rise, so does the demand for quality construction materials like injection molded plastics. This trend is not only observed in China but is a global phenomenon, contributing to the overall growth of the injection molded plastics industry.

Restraint: Growing environmental concerns

While the global injection molded plastics market is growing, it faces significant challenges due to the environmental impact associated with its production. Plastics, derived from crude oil, emit substantial amounts of toxic gases during production and combustion, contributing to global carbon dioxide emissions. These emissions are on the rise, particularly in developing countries undergoing rapid industrialization.

China, a major player in the global market, is also one of the largest emitters of carbon dioxide. This is largely due to the country’s swift infrastructure development and industrialization, with industries such as construction, transportation, and chemicals expanding rapidly.

In 2020, developed countries like the U.S. managed to reduce their emissions, largely due to government environmental policies. However, China’s CO₂ emissions reached a staggering 10.32 billion tons in 2012, accounting for nearly 29% of global emissions.

In response to these environmental concerns, the International Energy Agency (IEA) has recommended using coal as a feedstock for petrochemicals instead of naphtha and natural gas, given its lower CO₂ emissions. The IEA also advocates for countries to reduce fossil-fuel subsidies and adopt more energy-efficient production methods. These recommendations aim to mitigate the environmental impact of industries like injection molded plastics.

What Does This Report Include?

This section will provide insights into the contents included in this injection molded plastic market report and help gain clarity on the structure of the report to assist readers in navigating smoothly.

Injection molded plastic market qualitative analysis

Industry overview
Industry trends
Market drivers and restraints
Market size
Growth prospects
Porter’s analysis
PESTEL analysis
Key market opportunities prioritized
Competitive landscape
- Company overview
- Financial performance
- Product benchmarking
- Latest strategic developments

Injection molded plastic market quantitative analysis

Market size, estimates, and forecast from 2018 to 2030
Market estimates and forecast for product segments up to 2030
Regional market size and forecast for product segments up to 2030
Market estimates and forecast for application segments up to 2030
Regional market size and forecast for application segments up to 2030
Company financial performance

GET A FREE SAMPLE

This FREE sample includes market data points, ranging from trend analyses to market estimates & forecasts. See for yourself.

Or view our licence options:

NEED A CUSTOM REPORT?

We can customize every report - free of charge - including purchasing stand-alone sections or country-level reports, as well as offer affordable discounts for start-ups & universities.

ESOMAR certified & member

ISO Certified

We are GDPR and CCPA compliant! Your transaction & personal information is safe and secure. For more details, please read our privacy policy.